Current NCP-US-6.5 Exam Dumps [2025] Complete Nutanix Exam Smoothly
NCP-US-6.5 Premium PDF & Test Engine Files with 118 Questions & Answers
NEW QUESTION # 61
What is the most efficient way of enabling users to restore their files without administrator intervention in multiple Files shares?
- A. Click Enable Self Service Restore in the Edit wizard for each share in Shares tab from Files Console.
- B. Add all FSVMs to a Consistency Group within a single asynchronous Protection Domain in PE.
- C. Click Enable next to the name of the share in Manage Recovery Settings from Data Lens.
- D. Assign the same Category to all FSVMs and adding that Category to a single Protection Policy in PC.
Answer: A
Explanation:
Nutanix Files allows users to restore their files from the snapshots taken by the protection policy. A protection policy is a set of rules that defines how often snapshots are taken, how long they are retained, and where they are replicated. A protection policy can be applied to one or more file shares. To enable users to restore their files without administrator intervention, the administrator must enable the Self Service Restore option for each share in the Files Console. This option adds a hidden folder named .snapshot in each share, which contains all the snapshots taken by the protection policy. Users can access this folder and browse the snapshots to find and restore their files. The administrator can also configure the permissions and quota for the .snapshot folder. Reference: Nutanix Files Administration Guide, page 75; Nutanix Files Self-Service Restore Guide
NEW QUESTION # 62
An administrator is trying to create a Distributed Share, but the Use Distributed Share/Export type instead of Standard option is not present when creating the share.
What is most likely the cause for this?
- A. The cluster is configured with hybrid storage
- B. The file server resides on a single node cluster.
- C. The file server does not have the correct license
- D. The cluster only has three nodes.
Answer: B
Explanation:
The most likely cause for this issue is that the file server resides on a single node cluster. A distributed share is a type of SMB share or NFS export that distributes the hosting of top-level directories across multiple FSVMs, which improves load balancing and performance. A distributed share cannot be created on a single node cluster, because there is only one FSVM available. A distributed share requires at least two nodes in the cluster to distribute the directories. Therefore, the option to use distributed share/export type instead of standard is not present when creating a share on a single node cluster. Reference: Nutanix Files Administration Guide, page 33; Nutanix Files Solution Guide, page 8
NEW QUESTION # 63
An administrator has deployed a new Files cluster within a Windows Environment.
After some days, he Files environment is not able to synchronize users with the Active Directory server anymore. The administrator observes a large time difference between the Files environment and the Active Directory Server that is responsible for the behavior.
How should the administrator prevent the Files environment and the AD Server from having such a time difference in future?
- A. Use 0.pool.ntp.org as the NTP Server for the Files environment.
- B. Connect to every FSVM and edit the time manually.
- C. Use 0.pool.ntp.org as the NTP Server for the AD Server.
- D. Use the same NTP Servers for the File environment and the AD Server.
Answer: D
Explanation:
The administrator should prevent the Files environment and the AD Server from having such a time difference in future by using the same NTP Servers for the File environment and the AD Server. NTP (Network Time Protocol) is a protocol that synchronizes the clocks of devices on a network with a reliable time source. NTP Servers are devices that provide accurate time information to other devices on a network. By using the same NTP Servers for the File environment and the AD Server, the administrator can ensure that they have consistent and accurate time settings and avoid any synchronization issues or errors. Reference: Nutanix Files Administration Guide, page 32; Nutanix Files Troubleshooting Guide
NEW QUESTION # 64
Before upgrading Files or creating a file server, which component must first be upgraded to a compatible version?
- A. File Analytics
- B. Prism Central
- C. FSM
- D. FSVM
Answer: B
Explanation:
The component that must first be upgraded to a compatible version before upgrading Files or creating a file server is Prism Central. Prism Central is a web-based user interface that allows administrators to manage multiple Nutanix clusters and services, including Files. Prism Central must be upgraded to a compatible version with Files before upgrading an existing file server or creating a new file server. Otherwise, the upgrade or creation process may fail or cause unexpected errors. References: Nutanix Files Administration Guide, page 21; Nutanix Files Upgrade Guide
NEW QUESTION # 65
Which prerequisite is required to deploy Objects on AHV or ESXi?
- A. Prism Central version is 5.17.1 or later
- B. Port 9440 is accessible on both PE and PC
- C. Valid SSL Certificate
- D. Nutanix STARTER License
Answer: B
Explanation:
Nutanix Objects, part of Nutanix Unified Storage (NUS), is an S3-compatible object storage solution that can be deployed on AHV or ESXi hypervisors. Deploying Objects has specific prerequisites to ensure successful installation and operation.
Analysis of Options:
* Option A (Prism Central version is 5.17.1 or later): Incorrect. While Nutanix Objects requires Prism Central for deployment and management, the minimum version for Objects deployment is typically lower (e.g., Prism Central 5.15 or later, depending on the Objects version). Version 5.17.1 is not a specific requirement for Objects deployment on AHV or ESXi.
* Option B (Port 9440 is accessible on both PE and PC): Correct. Port 9440 is used for communication between Prism Element (PE) and Prism Central (PC), as well as for internal Nutanix services. When deploying Objects, Prism Central communicates with the cluster (via Prism Element) to deploy Object Store Service VMs. This communication requires port 9440 to be open between PE and PC, making it a key prerequisite.
* Option C (Valid SSL Certificate): Incorrect. While a valid SSL certificate is recommended for secure communication (e.g., for S3 API access), it is not a strict prerequisite for deploying Objects. Objects can be deployed with self-signed certificates, though Nutanix recommends replacing them with valid certificates for production use.
* Option D (Nutanix STARTER License): Incorrect. The Nutanix STARTER license is an entry-level license for basic cluster functionality (e.g., VMs, storage). However, Nutanix Objects requires a separate license (e.g., Objects license or a higher-tier AOS license like Pro or Ultimate). The STARTER license alone does not support Objects deployment.
Why Option B?
Port 9440 is critical for communication between Prism Element and Prism Central during the deployment of Objects. If this port is blocked, the deployment will fail, as Prism Central cannot communicate with the cluster to deploy the Object Store Service VMs.
Exact Extract from Nutanix Documentation:
From the Nutanix Objects Deployment Guide (available on the Nutanix Portal):
"Before deploying Nutanix Objects on AHV or ESXi, ensure that port 9440 is accessible between Prism Element (PE) and Prism Central (PC). This port is required for communication during the deployment process, as Prism Central manages the deployment of Object Store Service VMs on the cluster."
:
Nutanix Objects Deployment Guide, Version 4.0, Section: "Prerequisites for Deploying Objects" (Nutanix Portal).
Nutanix Certified Professional - Unified Storage (NCP-US) Study Guide, Section: "Nutanix Objects Deployment Requirements".
NEW QUESTION # 66
Which protocols are supported by Files?
- A. SMBv1. SMBv2, NFSv3, NFSv4
- B. SMBv1. SMBv2, NFSv2, NFSv3
- C. SMBv2 SMBv3, NFSv3, NFSv4
- D. SMBv2 SMBv3, NFSv2, NFSv3
Answer: C
Explanation:
The protocols that are supported by Files are SMBv2, SMBv3, NFSv3, and NFSv4. SMB (Server Message Block) is a protocol that allows clients to access files, printers, and other resources on a network. NFS (Network File System) is a protocol that allows clients to access files on a remote server as if they were local. Files supports both SMB and NFS protocols for creating shares and exports that can be accessed by different types of clients. Reference: Nutanix Files Administration Guide, page 31; Nutanix Files Solution Guide, page 6
NEW QUESTION # 67
Which two steps are required for enabling Data Lens? (Choose two.)
- A. Add File Services VM admin credentials to a MyNutanix account.
- B. Configure the Data Services IP in Prism Central.
- C. Configure a MyNutanix account to access the Data Lens console.
- D. In Prism, enable Pulse health monitoring.
Answer: A,C
Explanation:
Nutanix Data Lens, part of Nutanix Unified Storage (NUS), provides data governance, analytics, and ransomware protection for Nutanix Files. Enabling Data Lens involves setting up access to the Data Lens service, which is a cloud-based service hosted by Nutanix, and integrating it with the on-premises file server.
* Analysis of Options:
* Option A (In Prism, enable Pulse health monitoring): Incorrect. Pulse is a Nutanix feature that collects telemetry data for health monitoring and support, sending it to Nutanix Insights. While Pulse is recommended for overall cluster health, it is not a required step for enabling Data Lens. Data Lens operates independently of Pulse and focuses on file server analytics, not cluster health monitoring.
* Option B (Configure a MyNutanix account to access the Data Lens console): Correct. Data Lens is a cloud-based service, and accessing its console requires a MyNutanix account. The administrator must configure the MyNutanix account credentials in Prism Central to enable Data Lens and access its features, such as the Data Lens dashboard for monitoring file server activity. This is a mandatory step to integrate with the cloud service.
* Option C (Configure the Data Services IP in Prism Central): Incorrect. The Data Services IP is used for iSCSI traffic in Nutanix Volumes (as noted in Questions 25 and 31), not for Data Lens. Data Lens communicates with the Nutanix cloud (insights.nutanix.com) over the internet and does not require a Data Services IP configuration.
* Option D (Add File Services VM admin credentials to a MyNutanix account): Correct. To enable Data Lens for a file server, the administrator must provide the File Services VM (FSVM) admin credentials, which are used to authenticate and integrate the file server with the Data Lens service.
These credentials are added via the MyNutanix account configuration in Prism Central, allowing Data Lens to access the file server for monitoring and analytics.
* Selected Steps:
* B: Configuring a MyNutanix account is required to access the Data Lens console and enable the service.
* D: Adding FSVM admin credentials to the MyNutanix account ensures that Data Lens can authenticate and monitor the file server.
* Exact Extract from Nutanix Documentation:From the Nutanix Data Lens Administration Guide (available on the Nutanix Portal):
* "To enable Data Lens, configure a MyNutanix account in Prism Central to access the Data Lens console. Additionally, add the File Services VM admin credentials to the MyNutanix account to allow Data Lens to authenticate with the file server and enable monitoring and analytics features."
:
Nutanix Data Lens Administration Guide, Version 4.0, Section: "Enabling Data Lens for Nutanix Files" (Nutanix Portal).
Nutanix Certified Professional - Unified Storage (NCP-US) Study Guide, Section: "Nutanix Data Lens Setup".
NEW QUESTION # 68
What is the network requirement for a File Analytics deployment?
- A. Must use the Storage-side network
- B. Must use the CVM not work
- C. Must use the Client-side network
- D. Must use the Backplane network
Answer: C
Explanation:
Nutanix File Analytics is a feature that provides insights into the usage and activity of file data stored on Nutanix Files. File Analytics consists of a File Analytics VM (FAVM) that runs on a Nutanix cluster and communicates with the File Server VMs (FSVMs) that host the file shares. The FAVM collects metadata and statistics from the FSVMs and displays them in a graphical user interface (GUI). The FAVM must be deployed on the same network as the FSVMs, which is the Client-side network. This network is used for communication between File Analytics and FSVMs, as well as for accessing the File Analytics UI from a web browser. The Client-side network must have DHCP enabled and must be routable from the external hosts that access the file shares and File Analytics UI. References: Nutanix Files Administration Guide, page 93; Nutanix File Analytics Deployment Guide
NEW QUESTION # 69
An organization currently has two Objects instances deployed between two sites. Both instances are managed via manage the same Prism Central to simplify management.
The organization has a critical application with all data in a bucket that needs to be replicated to the secondary site for DR purposes. The replication needs to be asynchronous, including al delete the marker versions.
- A. Leverage the Objects Baseline Replication Tool from a Linus VM
- B. Use a protection Domain to replicate the objects Volume Group.
- C. Create a Bucket replication rule, set the destination Objects instances.
- D. With Object Browser, upload the data at the destination site.
Answer: C
Explanation:
The administrator can achieve this requirement by creating a bucket replication rule and setting the destination Objects instance. Bucket replication is a feature that allows administrators to replicate data from one bucket to another bucket on a different Objects instance for disaster recovery or data migration purposes. Bucket replication can be configured with various parameters, such as replication mode, replication frequency, replication status, etc. Bucket replication can also replicate all versions of objects, including delete markers, which are special versions that indicate that an object has been deleted. By creating a bucket replication rule and setting the destination Objects instance, the administrator can replicate data from one Objects instance to another asynchronously, including all delete markers and versions. Reference: Nutanix Objects User Guide, page 19; Nutanix Objects Solution Guide, page 9
NEW QUESTION # 70
An administrator ha having difficulty enabling Data Lens for a file server.
What is the most likely cause of this issue?
- A. The file server has blacklisted file types.
- B. The file server is in a Protection Domain.
- C. The file server has been cloned.
- D. SSR is enabled on the file server.
Answer: C
Explanation:
The most likely cause of this issue is that the file server has been cloned. Cloning a file server is not a supported operation and can cause various problems, such as Data Lens not being able to enable or disable for the cloned file server. To avoid this issue, the administrator should use the scale-out feature to add more FSVMs to an existing file server, or create a new file server from scratch. Reference: Nutanix Files Administration Guide, page 28; Nutanix Files Troubleshooting Guide, page 11
NEW QUESTION # 71
An administrator has been tasked with creating a distributed share on a single-node cluster, but has been unable to successfully complete the task.
Why is this task failing?
- A. Number of distributed shares limit reached.
- B. Distributed shares require multiple nodes.
- C. AOS version should be greater than 6.0.
- D. File server version should be greater than 3.8.0
Answer: B
Explanation:
A distributed share is a type of SMB share or NFS export that distributes the hosting of top-level directories across multiple FSVMs, which improves load balancing and performance. A distributed share cannot be created on a single-node cluster, because there is only one FSVM available. A distributed share requires at least two nodes in the cluster to distribute the directories. Therefore, the task of creating a distributed share on a single-node cluster will fail. Reference: Nutanix Files Administration Guide, page 33; Nutanix Files Solution Guide, page 8
NEW QUESTION # 72
Which protocols are supported by Files?
- A. SMBv1. SMBv2, NFSv3, NFSv4
- B. SMBv1. SMBv2, NFSv2, NFSv3
- C. SMBv2 SMBv3, NFSv3, NFSv4
- D. SMBv2 SMBv3, NFSv2, NFSv3
Answer: C
Explanation:
The protocols that are supported by Files are SMBv2, SMBv3, NFSv3, and NFSv4. SMB (Server Message Block) is a protocol that allows clients to access files, printers, and other resources on a network. NFS (Network File System) is a protocol that allows clients to access files on a remote server as if they were local.
Files supports both SMB and NFS protocols for creating shares and exports that can be accessed by different types of clients. References: Nutanix Files Administration Guide, page 31; Nutanix Files Solution Guide, page 6
NEW QUESTION # 73
An administrator wants to provide security against ransomware attacks in Files. The administrator wants to configure the environment to scan files for ransomware in real time and provide notification in the event of a ransomware attack. Which component should the administrator use to meet this requirement?
- A. Protection Domain
- B. Syslog Server
- C. File Analytics
- D. Files Console
Answer: C
Explanation:
Nutanix Files, part of Nutanix Unified Storage (NUS), can be protected against ransomware attacks using integrated tools. The administrator's requirement to scan files for ransomware in real time and provide notifications involves a component that can monitor file activity, detect anomalies, and alert administrators.
Analysis of Options:
* Option A (Protection Domain): Incorrect. Protection Domains in Nutanix are used for disaster recovery (DR) of VMs and Volume Groups, not for ransomware protection in Nutanix Files. Files uses replication policies (e.g., NearSync) for DR, and Protection Domains are not relevant for real-time ransomware scanning or notifications.
* Option B (File Analytics): Correct. Nutanix File Analytics, integrated with Nutanix Files, provides real-time monitoring and anomaly detection for ransomware protection. It scans file activity, uses machine learning to detect unusual patterns (e.g., mass file deletions, encryption), and sends notifications to administrators in the event of a potential ransomware attack. This meets the requirement for real-time scanning and notification (as seen in Question 7, where anomaly alerts were configured in File Analytics).
* Option C (Syslog Server): Incorrect. A Syslog Server can receive logs from Nutanix Files (as noted in Question 9), including alerts, but it is not a component that scans files for ransomware in real time. It is a passive logging tool and does not provide active ransomware detection or notification capabilities.
* Option D (Files Console): Incorrect. The Files Console is the management interface for Nutanix Files, used for configuring shares, FSVMs, and policies. While it can display alerts, it does not perform real- time ransomware scanning or detection-that functionality is provided by File Analytics.
Why Option B?
File Analytics is specifically designed for data analytics and security in Nutanix Files, including real-time ransomware detection. It monitors file operations, detects anomalies indicative of ransomware (e.g., rapid file modifications, deletions), and sends notifications to administrators, meeting the requirement for real-time scanning and alerts.
Exact Extract from Nutanix Documentation:
From the Nutanix File Analytics Administration Guide (available on the Nutanix Portal):
"Nutanix File Analytics provides real-time protection against ransomware by monitoring file operations and detecting anomalies, such as rapid file modifications or deletions. In the event of a potential ransomware attack, File Analytics sends notifications to administrators, allowing for quick response and mitigation."
:
Nutanix File Analytics Administration Guide, Version 4.0, Section: "Ransomware Protection with File Analytics" (Nutanix Portal).
Nutanix Certified Professional - Unified Storage (NCP-US) Study Guide, Section: "Nutanix File Analytics Security Features".
NEW QUESTION # 74
What tool can be used to report on a specific user's activity within a Files environment?
- A. Files Console Usage
- B. Prism Element Alerts menu
- C. Data Lens Audit Trails
- D. Prism Central Activity menu
Answer: C
Explanation:
The tool that can be used to report on a specific user's activity within a Files environment is Data Lens Audit Trails. Data Lens Audit Trails is a feature that provides detailed logs of all file operations performed by users on Files shares and exports, such as create, read, write, delete, rename, move, copy, etc. Data Lens Audit Trails can help administrators track and audit user actions and identify any unauthorized or malicious activities. The administrator can use Data Lens Audit Trails to filter and search for a specific user's activity based on various criteria, such as file name, file type, file size, file path, file share, file server, operation type, operation time, operation status, and so on. References: Nutanix Files Administration Guide, page 98; Nutanix Data Lens User Guide Nutanix Files, part of Nutanix Unified Storage (NUS), supports monitoring and reporting on user activities to track file access, modifications, and other operations. To report on a specific user's activity, a tool that provides detailed audit trails at the file level is required.
Analysis of Options:
* Option A (Prism Element Alerts menu): Incorrect. The Alerts menu in Prism Element provides cluster-level alerts (e.g., hardware failures, storage issues), but it does not offer detailed user activity reports for Files shares.
* Option B (Files Console Usage): Incorrect. The Files Console provides usage statistics for shares (e.g., storage consumption, share-level metrics), but it does not provide granular user activity reports or audit trails for specific users.
* Option C (Data Lens Audit Trails): Correct. Nutanix Data Lens, a service integrated with Nutanix Files, provides audit trails that track user activities at the file level. This includes details such as file access, modifications, deletions, and permission changes, allowing administrators to report on a specific user's actions within the Files environment.
* Option D (Prism Central Activity menu): Incorrect. The Activity menu in Prism Central provides high-level activity logs for cluster operations (e.g., VM creation, policy updates), but it does not provide detailed file-level user activity reports for Nutanix Files.
Why Data Lens Audit Trails?
Nutanix Data Lens is designed for data governance and security, offering features like audit trails, anomaly detection, and ransomware protection. The Audit Trails feature specifically allows administrators to filter and report on user activities, such as which files a user accessed, modified, or deleted, making it the ideal tool for this task.
Exact Extract from Nutanix Documentation:
From the Nutanix Data Lens Administration Guide (available on the Nutanix Portal):
"Data Lens Audit Trails provide detailed tracking of user activities within Nutanix Files shares.
Administrators can view and filter audit logs to report on specific user actions, including file access, modifications, deletions, and permission changes. This feature is accessible via the Data Lens dashboard."
:
Nutanix Data Lens Administration Guide, Version 4.0, Section: "Using Audit Trails for User Activity Monitoring" (Nutanix Portal).
Nutanix Certified Professional - Unified Storage (NCP-US) Study Guide, Section: "Nutanix Data Lens Features".
NEW QUESTION # 75
What is the minimum number of AHV nodes in a cluster required to use Objects?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Nutanix Objects, part of Nutanix Unified Storage (NUS), provides S3-compatible object storage and is deployed as a set of Object Store Service VMs on a Nutanix cluster running AHV (or ESXi). The minimum number of nodes required for an Objects deployment ensures high availability and fault tolerance.
Analysis of Options:
* Option A (1): Incorrect. A single-node cluster does not meet the minimum requirements for Nutanix Objects, as it cannot provide the necessary fault tolerance and high availability. Objects requires at least three nodes to distribute Object Store Service VMs and ensure data redundancy.
* Option B (2): Incorrect. A two-node cluster also does not meet the minimum requirements for Objects.
Nutanix requires at least three nodes to ensure that the Object Store Service VMs can be distributed across nodes and maintain availability in case of a node failure.
* Option C (3): Correct. Nutanix Objects requires a minimum of three AHV nodes in a cluster to deploy and operate. This ensures that the Object Store Service VMs (typically three or more) can be distributed across nodes, providing high availability and fault tolerance. A three-node cluster is the minimum configuration for Objects to ensure data redundancy and resilience.
* Option D (5): Incorrect. While a five-node cluster can certainly support Objects, it exceeds the minimum requirement. Nutanix specifies that three nodes are sufficient for a basic Objects deployment, making five nodes unnecessary for the minimum requirement.
Why Option C?
Nutanix Objects requires at least three nodes to ensure high availability, fault tolerance, and data redundancy.
This allows the Object Store Service VMs to be distributed across nodes, ensuring that the service remains available even if a node fails. Three nodes is the minimum cluster size specified by Nutanix for deploying Objects.
Exact Extract from Nutanix Documentation:
From the Nutanix Objects Deployment Guide (available on the Nutanix Portal):
"Nutanix Objects requires a minimum of three AHV nodes in a cluster to ensure high availability and fault tolerance. This allows the Object Store Service VMs to be distributed across nodes, providing redundancy and ensuring service availability in case of a node failure."
:
Nutanix Objects Deployment Guide, Version 4.0, Section: "Minimum Requirements for Objects Deployment" (Nutanix Portal).
Nutanix Certified Professional - Unified Storage (NCP-US) Study Guide, Section: "Nutanix Objects Deployment Requirements".
NEW QUESTION # 76
How many configure snapshots are supported for SSR in a file server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
The number of configurable snapshots that are supported for SSR in a file server is 200. SSR (Snapshot-based Replication) is a feature that allows administrators to replicate snapshots of shares or exports from one file server to another file server on a different cluster or site for disaster recovery purposes. SSR can be configured with various parameters, such as replication frequency, replication status, replication mode, etc.
SSR supports up to 200 configurable snapshots per share or export in a file server. References: Nutanix Files Administration Guide, page 81; Nutanix Files Solution Guide, page 9
NEW QUESTION # 77
Workload optimization on Files is configured on which entity?
- A. Share
- B. File Server
- C. Container
- D. Volume
Answer: B
Explanation:
Workload optimization in Nutanix Files, part of Nutanix Unified Storage (NUS), involves tuning the Files deployment to handle specific workloads efficiently. This was previously discussed in Question 13, where workload optimization was based on FSVM quantity. The question now asks which entity workload optimization is configured on.
Analysis of Options:
* Option A (Volume): Incorrect. Volumes in Nutanix refer to block storage provided by Nutanix Volumes, not Nutanix Files. Workload optimization for Files does not involve Volumes, which are a separate entity for iSCSI-based storage.
* Option B (Share): Incorrect. Shares in Nutanix Files are the individual file shares (e.g., SMB, NFS) accessed by clients. While shares can be tuned (e.g., quotas, permissions), workload optimization in Files is not configured at the share level-it applies to the broader file server infrastructure.
* Option C (Container): Incorrect. Containers in Nutanix are logical storage pools managed by AOS, used to store data for VMs, Files, and other services. While Files data resides in a container, workload optimization is not configured at the container level-it is specific to the Files deployment.
* Option D (File Server): Correct. Workload optimization in Nutanix Files is configured at the File Server level, which consists of multiple FSVMs (as established in Question 13). The File Server is the entity that manages all FSVMs, shares, and resources, and optimization tasks (e.g., scaling FSVMs, adjusting resources) are applied at this level to handle workloads efficiently.
Why Option D?
Workload optimization in Nutanix Files involves adjusting resources and configurations at the File Server level, such as scaling the number of FSVMs (as in Question 13) or tuning memory and CPU for the File Server. The File Server encompasses all FSVMs and shares, making it the entity where optimization is configured to ensure the entire deployment can handle the workload effectively.
Exact Extract from Nutanix Documentation:
From the Nutanix Files Administration Guide (available on the Nutanix Portal):
"Workload optimization in Nutanix Files is configured at the File Server level. This involves adjusting the number of FSVMs, allocating resources (e.g., CPU, memory), and tuning configurations to optimize the File Server for specific workloads."
:
Nutanix Files Administration Guide, Version 4.0, Section: "Optimizing Nutanix Files for Workloads" (Nutanix Portal).
Nutanix Certified Professional - Unified Storage (NCP-US) Study Guide, Section: "Nutanix Files Performance Optimization".
NEW QUESTION # 78
The Administrator needs to review the following graphs, as displayed in the exhibit.
* Storage Used
* Open Connections
* Number of Files
* Top Shares by Current Capacity
* Top Shares by current Connections
Where should the administrator complete this action?
- A. Files Console Dashboard View
- B. Files Console Share View
- C. Files Console Data Management View
- D. Files Console Monitoring View
Answer: A
Explanation:
The Files Console Dashboard View provides an overview of the Files cluster performance and usage, including the following graphs:
* Storage Used: Shows the total storage used by the Files cluster, including data, metadata, and snapshots.
* Open Connections: Shows the number of active SMB and NFS connections to the Files cluster.
* Number of Files: Shows the number of files stored in the Files cluster, excluding snapshots.
* Top Shares by Current Capacity: Shows the top five shares by current capacity usage in the Files cluster.
* Top Shares by Current Connections: Shows the top five shares by current connection count in the Files cluster2. References: Nutanix Files Administration Guide2
NEW QUESTION # 79
......
Nutanix NCP-US-6.5 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NCP-US-6.5 Premium Files Practice Valid Exam Dumps Question: https://www.prep4sureexam.com/NCP-US-6.5-dumps-torrent.html
Get 100% Real NCP-US-6.5 Accurate & Verified Answers As Seen in the Real Exam!: https://drive.google.com/open?id=1_o6GBKs5yKrDIeuY17vwD5IEQGPVxEND