2023 Latest Juniper JN0-363 Real Exam Dumps PDF
JN0-363 Exam Dumps, JN0-363 Practice Test Questions
Juniper JN0-363 Exam Certification Details:
| Exam Code | JN0-363 JNCIS-SP |
| Recommended Training | Junos Intermediate Routing (JIR) Junos Service Provider Switching (JSPX) Junos MPLS Fundamentals (JMF) |
| Duration | 90 minutes |
| Exam Name | Service Provider Routing and Switching Specialist |
NEW QUESTION 127
Click the Exhibit button.
Referring to the exhibit, why is the route hidden?
- A. The wrong BGP address family is enabled for the BGP session
- B. The MPLS LSP to the 192.168.0.2 peer is down
- C. The route has yet to be verified
- D. The protocol next hop is not reachable
Answer: D
NEW QUESTION 128
What happens when a packet matches a static route with the next hop parameter set to reject?
- A. The system silently drops the packet
- B. An ICMP message is sent to the source and the packet is forwarded
- C. The packet is forwarded and the packet is marked as rejected in the header
- D. An ICMP message is sent to the source and the packet is dropped
Answer: D
Explanation:
https://www.informit.com/articles/article.aspx?p=30666&seqNum=5
NEW QUESTION 129
Click the Exhibit button.
You have applied the policy shown in the exhibit to the forwarding table on an MX Series device.
How is traffic load-balanced?
- A. per flow
- B. per segment
- C. per frame
- D. per packet
Answer: D
NEW QUESTION 130
Referring to the exhibit, how do you verify the status of the tunnel from R1?
- A. Issue the ping 172.20.iii.io source 203.0.113.2 command.
- B. Issue the ping 172.20.111.10 source 198.51.100.1 command.
- C. Issue the ping 172.20. Ill. 10 command.
- D. Issue the ping 172.20.111.10 source 172.20.110.1 command.
Answer: A
NEW QUESTION 131
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The local-address statement is required for the BGP session to establish correctly
- B. The configuration is for an external BGP session
- C. The multi-hop statement is required for the BGP session to establish correctly
- D. The configuration is for an internal BGP session
Answer: A,D
NEW QUESTION 132
You are deploying link aggregation groups.
- A. By default, what are two considerations in this scenario? (Choose two.)
- B. Member links are required to be contiguous ports.
- C. All the ports must have the same speed.
- D. Member links can reside on different members within an MC-LAG.
- E. There should only be four member links per LAG.
Answer: B,E
NEW QUESTION 133
Which two statements are correct about the service provider MPLS network shown in the exhibit? (Choose two.)
- A. R3 is considered an ingress router.
- B. R3 is considered a transit router.
- C. R3 is considered a P router.
- D. R3 is considered a PE router.
Answer: C,D
NEW QUESTION 134
You have been asked to use a convention that allows for auto configuration of interface addresses.
You are not allowed to use DHCPv6. What do you do?
- A. Use an IPv6 static configuration.
- B. Use a program (e.g. Vector-Wiz) to auto configure IP addresses.
- C. Use IPv6 in the network to configure hosts.
- D. Use IPv4 with the autoconfig option under family inet.
Answer: C
NEW QUESTION 135
Exhibit
You confirm that the R2 and R3 routers are receiving a BGP route to the 203.0.113.0/24 network, but both routers display the route as hidden. Referring to the exhibit, which two actions solve this problem? (Choose two.)
- A. Apply the touting policy on R1 as an Import policy to the IBGP group.
- B. Apply the routing policy on R1 as an export policy to the IBGP group.
- C. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for EBGP peering.
- D. Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for IBGP peering.
Answer: C,D
NEW QUESTION 136
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present
- B. The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
- C. The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present
- D. The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
Answer: A,C
NEW QUESTION 137
What is the TTL value for EBGP?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 138
Exhibit
Referring to the exhibit, where should next-hop-self-policy be applied to alter the next-hop value?
- A. The policy is applied as an export policy for the group int-64503.
- B. The policy is applied as an import policy for the group int- 64 503.
- C. The policy is applied as an Import policy for the group ext-64501.
- D. The policy is applied as an export policy for the group ext-64501.
Answer: C
NEW QUESTION 139
Click the Exhibit button.
Referring to the exhibit, why is the route hidden?
- A. The wrong BGP address family is enabled for the BGP session
- B. The MPLS LSP to the 192.168.0.2 peer is down
- C. The route has yet to be verified
- D. The protocol next hop is not reachable
Answer: D
NEW QUESTION 140
You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.
Which syntax will accomplish this task?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/layer-2-services-mac-bridge-domain-or-logical-interface-disabling-learning-for.html
NEW QUESTION 141
The segment touting SRGB start label Is 10,000 and the SRGB index range is 500.
In this scenario, which two statements are correct? (Choose two.)
- A. The last usable label is 10,499.
- B. The first usable label Is 10,000.
- C. The last usable label is 10.501.
- D. The first usable label is 10,001.
Answer: A,B
NEW QUESTION 142
Click the Exhibit button. Which two topologies shown in the exhibit could be implemented without a spanning-tree protocol? (Choose two.)
- A. star
- B. ring
- C. tree
- D. mesh
Answer: A,C
NEW QUESTION 143
When working with an MPLS LSP, what will the install 172.16.6.0/24 active command accomplish?
- A. The command will install the prefix in inet.0 rather than inet.3
- B. The command will swap the prefix from inet.0 to inet.3
- C. The command will swap the prefix from inet.3 to inet.0
- D. The command will install the prefix in inet.3 rather than inet.0
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/lsp-routes.html#id-21214
NEW QUESTION 144
You have two OSPF routers that are trying to form an adjacency. When you issue the command show ospf neighbor, you see that one router is in the loading state and the other is in the full state.Why are you seeing the router's state as loading?
- A. The router does not know about the received LSA header and has transmitted a link-state request.
- B. The router has established bidirectional communication with its peer.
- C. The router has finished transmitting, but is still receiving database information.
- D. The router is waiting for a start event.
Answer: C
NEW QUESTION 145
Exhibit
You have configured graceful RE switchover (GRES), however you cannot complete the show system switchover command.
Referring to the exhibit, what is the problem?
- A. The command is only available on the backup Routing Engine.
- B. The command is only available if non-stop routing is enabled.
- C. The command is only available If a backup router is configured.
- D. The command is only available If graceful restart is enabled.
Answer: A
NEW QUESTION 146
......
PDF (New 2023) Actual Juniper JN0-363 Exam Questions: https://www.prep4sureexam.com/JN0-363-dumps-torrent.html
Dumps Moneyack Guarantee - JN0-363 Dumps UpTo 90% Off: https://drive.google.com/open?id=14WowpDjk8vQKR7OOO12sb9GtE4zfrtIq