2023 Valid NSE5_FMG-7.0 test answers & Fortinet Exam PDF
Free Fortinet NSE5_FMG-7.0 Exam Questions and Answer from Training Expert Prep4sureExam
To become certified in Fortinet NSE5_FMG-7.0, candidates must have a solid understanding of FortiGate network security concepts and the FortiManager v7.0 platform. They are required to pass a multi-part examination that includes both theoretical and practical components, which tests their ability to deploy, configure, administer, and troubleshoot the FortiManager v7.0 in real-world scenarios.
NEW QUESTION # 13
What does a policy package status of Conflict indicate?
- A. The policy package configuration has been changed on both FortiManager and the managed device
independently. - B. The policy package reports inconsistencies and conflicts during a Policy Consistency Check.
- C. The policy package does not have a FortiGate as the installation target.
- D. The policy configuration has never been imported after a device was registered on FortiManager.
Answer: A
NEW QUESTION # 14
Refer to the following exhibit:
Which of the following statements are true based on this configuration? (Choose two.)
- A. The same administrator can lock more than one ADOM at the same time
- B. Unlocking an ADOM will install configuration automatically on managed devices
- C. Unlocking an ADOM will submit configuration changes automatically to the approval administrator
- D. Ungraceful closed sessions will keep the ADOM in a locked state until the administrator session times out
Answer: A,D
NEW QUESTION # 15
Refer to the exhibit.
Which statement about the object named ALL is true?
- A. FortiManager created the object ALL as a unique entity in its database, which can be only used by this
managed FortiGate. - B. FortiManager updated the object ALL using the FortiManager value in its database.
- C. FortiManager installed the object ALL with the updated value.
- D. FortiManager updated the object ALL using the FortiGate value in its database.
Answer: D
NEW QUESTION # 16
Which of the following statements are true regarding reverting to previous revision version from the revision history? (Choose two.)
- A. It will modify device-level database
- B. To push these changes to a managed device, it required an install operation to the managed FortiGate.
- C. Reverting to a previous revision history will tag the device settings status as Auto-Update.
- D. Reverting to a previous revision history will generate a new version ID and remove all other history
Answer: A,B
NEW QUESTION # 17
Which two items does an FGFM keepalive message include? (Choose two.)
- A. FortiGate license information
- B. FortiGate configuration checksum
- C. FortiGate IPS version
- D. FortiGate uptime
Answer: B,C
NEW QUESTION # 18
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?
- A. FortiManager will disable the status of the referenced firewall policy
- B. FortiManager will replace the deleted address object with all address object in the referenced firewall policy
- C. FortiManager will replace the deleted address object with the none address object in the referenced
firewall policy - D. FortiManager will not allow the administrator to delete a referenced address object
Answer: C
NEW QUESTION # 19
View the following exhibit.
What is the purpose of setting ADOM Mode to Advanced?
- A. The setting enables the ADOMs feature on FortiManager
- B. The setting allows automatic updates to the policy package configuration for a managed device
- C. This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.
- D. The setting disables concurrent ADOM access and adds ADOM locking
Answer: C
NEW QUESTION # 20
View the following exhibit.
Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?
- A. Policy seq#3 will be installed on the Trainer[NAT] VDOM only
- B. Policy seq#3 will be not installed on any managed device
- C. Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets
- D. The Install On column value represents successful installation on the managed devices
Answer: C
NEW QUESTION # 21
In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?
- A. Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.
- B. FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.
- C. Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.
- D. Secondary device with highest priority will automatically be promoted to the primary role, and manually
reconfigure all other secondary devices to point to the new primary device
Answer: A
Explanation:
FortiManager_6.4_Study_Guide-Online - page 346
FortiManager HA doesn't support IP takeover where an HA state transition is transparent to administrators. If a failure of the primary occurs, the administrator must take corrective action to resolve the problem that may include invoking the state transition. If the primary device fails, the administrator must do the following in order to return the FortiManager HA to a working state:
1. Manually reconfigure one of the secondary devices to become the primary device
2. Reconfigure all other secondary devices to point to the new primary device
NEW QUESTION # 22
Refer to the exhibit.
Given the configuration shown in the exhibit, how did FortiManager handle the service category named General?
- A. FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database.
- B. FortiManager ignored the firewall service category General but created a new service category in its database.
- C. FortiManager ignored the firewall service category General and did not update Its database with the value
- D. FortiManager ignored the firewall service category general and deleted the duplicate value In Its database
Answer: A
NEW QUESTION # 23
An administrator would like to create an SD-WAN using central management. What steps does the
administrator need to perform to create an SD-WAN using central management?
- A. You must specify a gateway address when you create a default static route
- B. First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route
- C. Remove all the interface references such as routes or policies
- D. Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.
Answer: D
NEW QUESTION # 24
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
- B. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
- C. FortiGate will reject the CLI commands that will cause the tunnel to go down.
- D. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
Answer: B
NEW QUESTION # 25
View the following exhibit.
If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)
- A. FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on
FortiGate under central management. - B. FortiGate is discovered by FortiManager through the FortiGate NATed IP address.
- C. If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.
- D. During discovery, the FortiManager NATed IP address is not set by default on FortiGate.
Answer: B,D
Explanation:
Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured under FortiGate central management configuration.
NEW QUESTION # 26
Refer to the exhibit.
According to the error message why is FortiManager failing to add the FortiAnalyzer device?
- A. The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager
- B. The administrator must use the Add Model Device section and discover the FortiAnaJyzer device
- C. The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface
- D. The administrator must use the correct user name and password of the FortiAnalyzer device
Answer: C
NEW QUESTION # 27
Which two statements about the scheduled backup of FortiManager are true? (Choose two.)
- A. It can be configured using the CLI and GUI.
- B. It does not back up firmware images saved on FortiManager.
- C. It supports FTP, SCP, and SFTP.
- D. It backs up all devices and the FortiGuard database.
Answer: B,C
NEW QUESTION # 28
Which configuration setting for FortiGate is part of a device-level database on FortiManager?
- A. VIP and IP Pools
- B. Firewall policies
- C. Routing
- D. Security profiles
Answer: C
Explanation:
The FortiManager stores the FortiGate configuration details in two distinct databases. The device-level database includes configuration details related to device-level settings, such as interfaces, DNS, routing, and more. The ADOM-level database includes configuration details related to firewall policies, objects, and security profiles.
NEW QUESTION # 29
In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator sent a device registration to FortiManager from a remote FortiGate. Which one of the following statements is true?
- A. The FortiGate will be added automatically to the default ADOM named FortiGate.
- B. The FortiManager administrator must add the unregistered device manually to the unregistered device
- C. The FortiGate will be automatically added to the Training ADOM.
- D. By default, the unregistered FortiGate will appear in the root ADOM.
Answer: D
Explanation:
manually to the Training ADOM using the Add Device wizard
NEW QUESTION # 30
You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result?
- A. The shared policy package will not be moved to the new ADOM
- B. Any unused objects from a previous ADOM are moved to the new ADOM automatically
- C. Any pending device settings will be installed automatically
- D. Policy packages will be imported into the new ADOM automaticallyD
Answer: A
NEW QUESTION # 31
Which two settings are required for FortiManager Management Extension Applications (MEA)? (Choose two.)
- A. You must open the ports to the Fortinet registry
- B. The administrator must have the super user profile.
- C. When you configure MEA, you must open TCP or UDP port 540.
- D. You must create a MEA special policy on FortiManager using the super user profile
Answer: B,D
NEW QUESTION # 32
What does the diagnose dvm check-integrity command do? (Choose two.)
- A. Verifies and corrects duplicate VDOM entries
- B. Verifies and corrects database schemas in all object tables
- C. Internally upgrades existing ADOMs to the same ADON version in order to clean up and correct the ADOM syntax
- D. Verifies and corrects unregistered, registered, and deleted device states
Answer: A,D
Explanation:
6.2 Study Guide page 305 verify and correct parts of the device manager databases, including: - inconsistent device-to-group and group-to-ADOM memberships - unregistered, registered, and deleted device states - device lock statuses - duplicate VDOM entries
NEW QUESTION # 33
An administrator is replacing a device on FortiManager by running the following command:
execute device replace sn <devname> <serialnum>.
What device name and serial number must the administrator use?
- A. Device name and serial number of the original device.
- B. Device name of the original device and serial number of the replacement device.
- C. Device name of the replacement device and serial number of the original device.
- D. Device name and serial number of the replacement device.
Answer: B
NEW QUESTION # 34
Refer to the exhibit.
You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)
- A. It installs device-level changes to FortiGate without launching the Install Wizard
- B. It cannot be canceled once initiated and changes will be installed on the managed device
- C. It will not create a new revision in the revision history
- D. It provides the option to preview configuration changes prior to installing them
Answer: A,B
Explanation:
FortiManager_6.4_Study_Guide-Online - page 164
The Install Config option allows you to perform a quick installation of device-level settings without launching the Install Wizard. When you use this option, you cannot preview the changes prior to committing. Administrator should be certain of the changes before using this install option, because the install can't be cancelled after the process is initiated.
NEW QUESTION # 35
Which two settings must be configured for SD-WAN Central Management? (Choose two.)
- A. The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.
- B. SD-WAN must be enabled on per-ADOM basis
- C. You can create multiple SD-WAN interfaces per VDOM
- D. When you configure an SD-WAN, you must specify at least two member interfaces.
Answer: B,D
NEW QUESTION # 36
An administrator's PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash.
How can the administrator unlock the ADOM?
- A. Delete the previous admin session manually through the FortiManager GUI or CLI.
- B. Log in using the same administrator account to unlock the ADOM.
- C. Restore the configuration from a previous backup.
- D. Log in as Super_User in order to unlock the ADOM.
Answer: A
NEW QUESTION # 37
......
Fortinet NSE 5 - FortiManager 7.0 certification is a valuable credential for network security professionals who are responsible for managing Fortinet security appliances. Fortinet NSE 5 - FortiManager 7.0 certification validates the skills and knowledge required to manage complex security infrastructures using the FortiManager platform. With the help of study materials and hands-on experience, candidates can prepare for the exam and enhance their career prospects in the field of network security.
Top Fortinet NSE5_FMG-7.0 Courses Online: https://www.prep4sureexam.com/NSE5_FMG-7.0-dumps-torrent.html
NSE5_FMG-7.0 Practice Dumps - Verified By Prep4sureExam Updated 74 Questions: https://drive.google.com/open?id=1LMH1XlvMey_fQB3OOrRZMqAEHl1ovnoU