Free 2021 NS0-175 Dumps 100 Pass Guarantee With Latest Demo
Prepare NS0-175 Question Answers Free Update With 100% Exam Passing Guarantee [2021]
NEW QUESTION 84
Which two support account levels are minimally required when you deploy a FlexPod Datacenter solution?
(Choose two.)
- A. NetApp SupportEdge Expert NBD
- B. NetApp SupportEdge Advisor 24x7x4
- C. Cisco Solution Support 24x7x4
- D. Cisco SmartNet Total Care 24x7x4
Answer: B,C
NEW QUESTION 85
The FlexPod Data Center with Microsoft Fast Track Private Cloud 3 Solution utilizes an updated virtual hard disk format to support virtual disks up to 64 TB in size.
What is this Windows Server 2012 Hyper-V virtual disk format?
- A. VMDK
- B. VHD
- C. VHDX
- D. HDFS
Answer: C
NEW QUESTION 86
Which hardware device should provide Fibre Channel services in a FlexPod design?
- A. Cisco Nexus 5500
- B. Cisco UCS 6248 Fabric Interconnect
- C. NetApp FAS
- D. Cisco Nexus 3000
Answer: A
NEW QUESTION 87
You have determined that a FlexPod Express solution, based on a NetApp FAS2552A using an iSCSI boot for the compute layer, is the preferred solution for your customer.
In this scenario, which two components are required in the NetApp storage system? (Choose two.)
- A. two 8-Gbps Fibre Channel ports
- B. FC license
- C. iSCSI license
- D. two 10-Gbps Ethernet ports
Answer: A,D
NEW QUESTION 88
Refer to the exhibit.
What would be the correct configuration for the ports labeled?
- A. int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15
- B. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vlan 35switchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15
- C. vlan 35fcoe vsan 35int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint portchannel15switchport mode trunkswitchport trunk allowed vlan 35spanning-tree port type edge trunkint vfc15bind interface po15switchport trunk allowed vsan 35vsan databasevsan 35 interface vfc15
- D. int eth1/31-32channel-group 15 mode activeint po15switchport mode access vsan 45vsan databasevsan 45 interface po15
- E. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport access vlan 35int vfc15bind interface po15switchport trunk allowed vsan 45vsan databasevsan 45 interface vfc15
Answer: C
NEW QUESTION 89
A customer has reviewed the latest vSphere CVD and asks you if they can use their older Cisco servers in the new FlexPod solution and still have supported configuration.
Which statement is true in this scenario?
- A. FlexPod configurations are fully supported if they follow a specific NetApp Verified Architecture.
- B. FlexPod configurations are fully supported regardless of the equipment used.
- C. FlexPod configurations are fully supported if they follow a specific Cisco Validated Design.
- D. FlexPod configurations are fully supported if they follow the technical specifications and compatibility matrices.
Answer: C
NEW QUESTION 90
NetApp Services include all of the following EXCEPT ______.
- A. System Administration Services
- B. Support services
- C. Education
- D. Professional services
Answer: A
NEW QUESTION 91
Which UCS Manager feature will allow you to have a consistent server configuration within the system?
- A. address pools
- B. service profile templates
- C. same blade hardware configuration
- D. role-based access control
Answer: B
NEW QUESTION 92
A customer has a workload that requires an extremely dense deployment of CPU cores. For this workload, they have chosen to deploy servers that use AMD EPYC processors.
Which Cisco UCS server product would you use to satisfy this workload demand?
- A. Cisco UCS B200 M5
- B. Cisco UCS C125 M5
- C. Cisco UCS B480 M5
- D. Cisco UCS C240 M5
Answer: B
NEW QUESTION 93
In which two sources would you verify scale out maximums for NetApp and Cisco UCS environments?
(Choose two.)
- A. Cisco Configurations Limits
- B. NetApp Interoperability Matrix
- C. Cisco UCS Hardware and Software Compatibility List
- D. NetApp Hardware Universe
Answer: B,C
NEW QUESTION 94
According to FlexPod CVDs, what is the recommended MTU size for iSCSI logical interfaces (LIFs) on the NetApp Storage Virtual Machine (SVM)?
- A. 9,124
- B. 1,500
- C. 3,000
- D. 9,000
Answer: D
NEW QUESTION 95
You are building a new FlexPod solution and want to verify that you have cabled all the components according to FlexPod design best practices prior to putting your solution into production.
Which tool would you leverage to validate the cabling?
- A. Resource comparison tool (RESCOMP)
- B. Solution builder
- C. Config Advisor
- D. UCS Manager
Answer: C
NEW QUESTION 96
You have a FlexPod solution that consists of a NetApp AFF A800 storage system, a Cisco MDS 9148S switch, and a Cisco UCS 6232 Fabric Interconnect. You want to upgrade NetApp ONTAP software on the AFF A800 to take advantage of a new feature.
In this scenario, which three tools would enable you to verify if the upgrade would be performed safely?
(Choose three.)
- A. Cisco Data Center Network Manager
- B. NetApp Active IQ Upgrade Advisor
- C. Cisco UCS Hardware and Software Compatibility List
- D. NetApp Interoperability Matrix Tool
- E. Cisco Intersight
Answer: A,D,E
NEW QUESTION 97
What is a NetApp storage system Ethernet port name?
- A. e0a
- B. eth0
- C. e0/1
- D. g0/1
Answer: A
NEW QUESTION 98
Which one of the following ACLs will allow requests from the Engineering group to www.netapp.com?
- A. allow group "engineering"and server-domain www.netapp.com
- B. allow groupname "engineering"and server-name www.netapp.com
- C. allow group "engineering" and server-name www.netapp.com
- D. allow groupname "engineering"and server-name matches "\.netapp\.com$"
Answer: D
NEW QUESTION 99
A customer wants to extend a FlexPod configuration across multiple sites using FlexPod with NetApp MetroCluster. One requirement is to extend the L2 domain across sites to enable live migration for critical applications.
Which Nexus 7000 feature enables this migration?
- A. ISSU
- B. ACI
- C. FabricPath
- D. OTV
Answer: D
NEW QUESTION 100
Exhibit:
Your customer wants to consolidate their multiple data center applications into a single FlexPod solution. The customer wants to maintain the current network protocols and storage tiers.
Referring to the exhibit, which set of FlexPod components satisfies the requirements?
- A. Cisco UCS 6332-16 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9000 Series, Cisco MDS 9000, NetApp AFF A800, and NetApp FAS8200
- B. Cisco UCS 6324 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9000 Series, Cisco MDS 9000, NetApp AFF A800, and NetApp FAS2700
- C. Cisco UCS 6296 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9000 Series, Cisco MDS 9000, NetApp AFF A800, and NetApp FAS8200
- D. Cisco UCS 6332-16 Fabric Interconnect, Cisco B-Series servers, Cisco Nexus 9000 Series, Cisco MDS 9000, NetApp AFF A800, and NetApp FAS2700
Answer: C
NEW QUESTION 101
You are sizing a FlexPod Datacenter solution for multitenancy use.
What are two important platform scaling considerations in this scenario? (Choose two.)
- A. maximum Cisco L1, L2 interfaces between Fabric Interconnects
- B. maximum NetApp ONTAP storage VM limits
- C. maximum Cisco vPC interfaces between Fabric Interconnects
- D. maximum NetApp ONTAP cluster limits
Answer: A,D
NEW QUESTION 102
......
NetApp NS0-175 Exam Certification Details:
| Passing Score | 66% |
| Exam Code | NS0-175 FlexPod |
| Exam Price | $150 USD |
| Exam Name | Cisco and NetApp FlexPod Design |
| Number of Questions | 60 |
| Duration | 90 minutes |
| Exam Registration | PEARSON VUE |
| Sample Questions | NetApp NS0-175 Sample Questions |
| Recommended Training | FlexPod Fundamentals |
Dumps Real Network Appliance NS0-175 Exam Questions [Updated 2021]: https://www.prep4sureexam.com/NS0-175-dumps-torrent.html