Get ready to pass the C1000-018 Exam right now using our IBM Certified Associate Analyst Exam Package
A fully updated 2021 C1000-018 Exam Dumps exam guide from training expert Prep4sureExam
NEW QUESTION 26
How can an analyst verify if any host in the deployment is vulnerable to CVE ID; CVE-2010-000?
- A. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: $CVE-2010000
- B. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: $2010-000
- C. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: CVE-2010000
- D. Use the asset search feature, select vulnerability external reference from the list of search parameters, select CVE and then type: 2010-000
Answer: A
NEW QUESTION 27
An analyst wants to find all events where Process name includes reference to exe files. Which quick search will return the expected result?
- A. /Process name/ AND /.*exe/
- B. /Process name/AND (/exe) )
- C. (Process name) AND /.*exe/
- D. "Process name" AND "*exe"
Answer: B
NEW QUESTION 28
An analyst notices that there are a number of invalid Offenses being created from a network node. This node has been determined to be in Domain 2 and has the following log sources sending it events: (3Com 8800 Series Switch from 172.18.1.1, Cisco ACE Firewall from 172.18.1.2, FireEye from 172.18.1.3, and Palo Alto PA Series from 172.18.1.8).
The analyst should create a False Positive Building Block that has a filter:
- A. "when the remote IP is one of the following 172.18.1.1, 172.18.1.2. 1.3 172. 18.18.1.8
- B. "when the destination IP is in 172.18.0.0/16"
- C. "when the local network is Domain 2 and when the source IP is in 172.18.0.0/16"
- D. "when the local network is Domain 2 and when the source IP is in 172.18.0.0/16"
Answer: D
NEW QUESTION 29
How does the Custom Rule Engine (CRE) evaluates rules?
- A. It runs stateless tests first, then runs stateful tests and evaluates the result.
- B. It runs rule tests line-by-line in order, and continues while tests are true.
- C. It runs all rule tests at the same time, and evaluates the result after all tests are complete
- D. It runs tests based on the criticality of the test, running the critical ones first.
Answer: A
NEW QUESTION 30
To provide insight into why QRadar considers the event to be threatening, what does QRadar add to the Offense that users cannot edit or delete?
- A. Location
- B. Source IP
- C. Annotations
- D. Attack path
Answer: C
NEW QUESTION 31
Which graph types are available for QRadar SIEM reports? (Choose two)
- A. Trivial curve
- B. Histogram
- C. Stacked Bar
- D. Pie
- E. Frequency curve
Answer: A,C
NEW QUESTION 32
Where can an analyst working with Offenses add a regular expression test into an existing rule?
- A. Left
- B. Bottom
- C. Top
- D. Right
Answer: C
NEW QUESTION 33
An analyst is performing an investigation regarding an Offense. The analyst is uncertain to whom some of the external destination IP addresses in List of Events are registered.
How can the analyst verify to whom the IP addresses are registered?
- A. Right-click on the destination address, More Options, then Information, and then DNS Lookup
- B. Right-click on the destination address, More Options, then IP Owner
- C. Right-click on the destination address, More Options, then Information, and then WHOIS Lookup
- D. Right-click on the destination address, More Options, then Navigate, and then Destination Summary
Answer: D
NEW QUESTION 34
How would an analyst Interpret this QRadar notification: "SAR Sentinel: threshold crossed?"
- A. The Custom Rule Engine is currently detecting a distributed denial of service attack.
- B. The system disk usage is above the threshold and must be reduced to avoid potential data loss.
- C. The system load is above the threshold and can experience reduced performance.
- D. The anomaly detection engine has detected volume of failed logins above the threshold.
Answer: B
NEW QUESTION 35
Where can an analyst investigate a security incident to determine the root cause of an issue, and then work to resolve it?
- A. Network Activity tab
- B. Risk tab
- C. Offense tab
- D. Vulnerabilities tab
Answer: D
NEW QUESTION 36
How can a log source be defined?
- A. Data source that can be found on the Network Activity tab.
- B. Data source such as a firewall or intrusion protection system (IPS) that creates an event log.
- C. Data source such as Netflow. J-Flow or sFlow data.
- D. Data source such as a user interacting with a QRadar Console to do daily work.
Answer: B
NEW QUESTION 37
An analyst is reviewing a rule that is configured to create an Offense indexed by a uri domain name. But even after validating all the rule conditions, an Offense is not generated.
What could be the reason for this kind of behaviour?
- A. Normalized property Source IP is empty in the events.
- B. Custom property url domain name is empty in the events.
- C. Normalized property url domain name is empty in the events.
- D. Custom property Eventname is empty in the events.
Answer: D
NEW QUESTION 38
An analyst has been assigned a number of Offenses to review and a new event occurs. review and manage.
While reviewing an inactive offense, a new event occurs.
Which statement applies to the Offense?
- A. The event is added in a new Offense that is created.
- B. The event is added to the Offense and the status is changed to Dormant.
- C. The rule that created the Offense is temporarily halted.
- D. The event is added to the Offense and the status is changed to Active.
Answer: B
NEW QUESTION 39
An analyst needs to investigate an Offense and navigates to the attached rule(s).
Where in the rule details would the analyst investigate the reason for why the rule was triggered?
- A. Rule actions
- B. List of test conditions
- C. Rules response limiter
- D. Rule responses
Answer: C
NEW QUESTION 40
What is the reason for this system notification?
"Time synchronization to primary or Console has failed"
- A. Deny ntpdate communication on port 223.
- B. Deny ntpdate communication on port 423.
- C. Deny ntpdate communication on port 323.
- D. Deny ntpdate communication on port 123
Answer: D
Explanation:
Explanation
https://www.ibm.com/docs/en/qradar-on-cloud?topic=appliances-time-synchronization-failed The managed host cannot synchronize with the console or the secondary HA appliance cannot synchronize with the primary appliance.
Administrators must allow ntpdate communication on port 123. When time synchronization is incorrect, data might not be reported correctly to the console. The longer the systems go without synchronization, the higher the risk that a search for data, report, or offense might return an incorrect result. Time synchronization is critical to successful requests from managed host and appliances
NEW QUESTION 41
How would an analyst efficiently include all the Antivirus logs integrated with QRadar for the last 24 hours?
- A. Log Activity -> Use Log Source parameter with Equals Operator
- B. Log Activity -> Use Log Source parameter with Equals any of Operator
- C. Log Activity -> Use Log Source Type parameter with Member of Operator
- D. Log Activity -> Use Log Source Type parameter with Equals any of Operator
Answer: B
NEW QUESTION 42
What information is included in flow details but is not in event details?
- A. Magnitude information
- B. Network summary information
- C. Log source information
- D. Number of bytes and packets transferred
Answer: B
NEW QUESTION 43
An analyst noticed that from a particular subnet (203.0.113.0/24), all IP addresses are simultaneously trying to reach out to the company's publicly hosted FTP server.
The analyst also noticed that this activity has resulted in a Type B Superflow on the Network Activity tab-Under which category, should the analyst report this issue to the security administrator?
- A. DDoS
- B. Syn Flood
- C. Network Scan
- D. Port Scan
Answer: B
Explanation:
Explanation
https://www.ibm.com/docs/en/SS42VS_7.3.3/com.ibm.qradar.doc/b_qradar_admin_guide.pdf
NEW QUESTION 44
An analyst is investigating access to sensitive data on a Linux system. Data is accessible from the /secret directory and can be viewed using the 'sudo oaf command. The specific file /secret/file_08-txt was known to be accessed in this way. After searching in the Log Activity Tab, the following results are shown.
When interpreting this, the analyst is having trouble locating events which show when the file was accessed.
Why could this be?
- A. The 'LinuxServer @ centos' log source has coalescing configured and the specific event for that file can only be accessed by clicking on the 'Event Count' value.
- B. The 'LinuxServer @ centos' log source has not been configured to send the relevant events to QRadar.
- C. The 'LinuxServer @ cantos' log source has boon configured as a Faise Positive and the specific event for that file has been dropped.
- D. The ;LinuxServer @ centos; log source has coalesscing conigured and the specific event for that file has been discardedd.
Answer: C
NEW QUESTION 45
When an Offense is triggered, it only shows the events that triggered the Offense. The analyst wants to investigate further to see more events around the incident, not only those that triggered the Offense. The analyst clicks on the event count and sees the events belonging to the Offense.
How can the analyst processed to see a more detailed picture of what occurred?
- A. Right-click and filter on the Destination IP.
- B. Right-click on the destination IP, and choose More Options, then Raw Events.
- C. Right-click on the source IP, and choose More Options, then Information, and then Search Events
- D. Right-click on the source IP, and choose View in DSM Editor.
Answer: C
NEW QUESTION 46
......
Master 2021 Latest The Questions IBM Certified Associate Analyst and Pass C1000-018 Real Exam!: https://www.prep4sureexam.com/C1000-018-dumps-torrent.html