[Jan-2022] Latest NS0-183 Exam Dumps for Pass Guaranteed
Reliable NetApp NCSIE ONTAP NS0-183 Dumps PDF Jan 04, 2022 Recently Updated Questions
NEW QUESTION 25
You are using a NetApp CN1610 cluster-interconnect switch and need to connect a new AFF A800A node to the switch.
In this scenario, how many Ethernet ports per node are required on each switch?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 26
What are two ways to identify an AFF All SAN Array system? (Choose two.)
- A. View the ONTAP System Manager system nodes.
- B. Use the san config show CLI command.
- C. Use the cluster image show CLI command.
- D. View the ONTAP System Manager cluster settings.
Answer: A,B
Explanation:
Ways to identify an ASA system You can identify an ASA system using ONTAP System Manager or using the ONTAP command line interface (CLI). From the ONTAP System Manager dashboard, you can click on the system nodes. The personality type is displayed as "ASA" for ASA systems. From the CLI, you can use san config show command. The ASA value returns as true for ASA systems
https://docs.netapp.com/us-en/ontap/task_asa_software_configuration.html#asa-host-settings-and-utilities
NEW QUESTION 27
You are setting up a new AFF A400 that will serve iSCSI LUNs. You will have four iSCSI SVMs that each need to connect to an Internet Storage Name Service (iSNS) for discovery and management purposes.
In this scenario, which network interface is needed for each SVM to register with the name service?
- A. SVM management LIF
- B. node management LIF
- C. intercluster LIF
- D. SVM data LIF
Answer: A
Explanation:
https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-sanag/GUID-E0C83978-2139-48C5-8C2B-80F4A385583E.html
NEW QUESTION 28
Click the Exhibit button.
After you install a FAS2720 with ONTAP 9.5, you disconnect the management port of node A to demonstrate cluster management LIF failover to the custom. When you reconnect the management port and try to revert the interface, you receive the following message.
Info: LIF "cluster_mgmt" has been hosted on port "NetApp-Cluster-01:e0M", whosehealth status is degraded.
You issue the network port showcommand and see the output shown in the exhibit. When you try to access the cluster interface, you cannot ping or connect to the cluster through the network.
Which two troubleshooting steps must you perform to solve the issue? (Choose two.)
- A. Reconnect the management cable to bring the port online.
- B. Set the Ignore Health Status parameter to true.
- C. Set the Ignore Health Status parameter to false.
- D. Use the network port modify -up-admin command to administratively down and up the port.
Answer: A,D
NEW QUESTION 29
You configured AutoSupport and are trying to send a full AutoSupport message to NetApp.
You use the autosupport history showcommand and see the output shown in the exhibit.
The customer confirms that the AutoSupport settings are correct.
Which two actions will solve this issue? (Choose two.)
- A. The customer needs to enable AutoSupport for both nodes.
- B. The customer needs to change the transport protocol to HTTP.
- C. The customer needs to white-list the two nodes on their mail server.
- D. The customer needs to exclude the two nodes from the attachment-size limitation.
Answer: A,C
NEW QUESTION 30
Click the Exhibit button.
Your ONTAP cluster shows the cluster network errors that are shown in the event log. What is used by ONTAP software to log the errors that are shown in the exhibit?
- A. BGP
- B. EMS
- C. AutoSupport
- D. SNMP
Answer: B
NEW QUESTION 31
Click the Exhibit button.
You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.
Referring to the exhibit, what must you do before you provision initial storage?
- A. Configure protocols.
- B. Configure a remote tier.
- C. Configure aggregates.
- D. Configure cluster LIFs.
Answer: C
NEW QUESTION 32
You are deploying a cluster with four AFF A300 nodes and Cisco 3232C switches. When you arrive at the customer's site, you notice that there are multiple breakout cables and four Cisco 3232C switches. In this scenario, which statement is true?
- A. Your customer ordered a MetroCluster IP configuration.
- B. A 4-node AFF A300 cluster requires two Cisco 3232C switches for the cluster interconnect and two for management.
- C. Cisco best practices require four Cisco 3232C switches for high availability.
- D. A 4-node AFF A300 cluster requires four Cisco 3232C switches.
Answer: A
NEW QUESTION 33
After completing the installation of a DS224C shelf, you observe the error shown in the exhibit.
Which action should you take to troubleshoot the error? (Choose two.)
- A. Perform a takeover-giveback.
- B. Re-seat the SAS card.
- C. Re-seat the IOM module.
- D. Reconnect the SAS cable.
Answer: C,D
NEW QUESTION 34
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. BGP
- B. IPspaces
- C. routing
- D. broadcast domains
Answer: B
NEW QUESTION 35
You are adding two new nodes to an existing switchless 2-node cluster. In this scenario, which two statements are true? (Choose two.)
- A. The existing cluster must use clustered Data ONTAP 8.1 or later software.
- B. You need to schedule downtime to add these two nodes.
- C. You first need to install the cluster interconnect switches to the existing cluster.
- D. You must make sure that the existing nodes are healthy and that all cluster links are up.
Answer: C,D
NEW QUESTION 36
Click the Exhibit button.
You are installing a 2-node AFF A400 switchless cluster. You have cabled the management network to the e0M port. NetApp also recommends cabling to a redundant management network switch.
Referring to the exhibit, to which port should the redundant management network be cabled?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 37
A customer wants to expand their 10-node AFF A700s SAN cluster on Cisco Nexus 3132Q-V interconnect switches. The customer has six AFF A700s nodes available.
In this scenario, what should you do to expand the cluster?
- A. Replace the switches with Cisco Nexus 5596T switches and then add the six nodes.
- B. Add six nodes to the existing cluster.
- C. Add an expansion module to each switch and then add the six nodes.
- D. Add two nodes to the existing cluster without exceeding the SAN cluster limit.
Answer: D
NEW QUESTION 38
You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs.
Referring to the exhibit, what is the problem?
- A. The LIF that was created has the wrong role type.
- B. The assigned port for the intercluster e1c LIF is in the down admin state.
- C. The home node of the new intercluster LIF has reached the maximum of four intercluster LIFs.
- D. The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.
Answer: A
NEW QUESTION 39
After a storage failover, you notice that a NAS LIF, that is linked to the broadcast domain CIFS, is no longer reachable after the takeover. Node cluster1-01 is still waiting for giveback.
Referring to the exhibit, what caused the problem?
- A. The broadcast-domain MTU needs to be either 1500 or 9000.
- B. The ports of cluster1-02 are missing in the broadcast domain.
- C. Port a0a of node cluster1-01 is down.
- D. The LIF has to be configured with a failover group.
Answer: A
NEW QUESTION 40
You are planning to update your running switch environment. You must know that certain conditions exist before the FASTPATH software and the RCF on a NetApp CN1610 cluster switch can be installed.
Which condition must exist in this scenario?
- A. You can only update your switch environment within offline windows.
- B. You must set the port configuration to default for all ports before running the portcfgdefaultport-numbercommand.
- C. All cluster logical interfaces (LIFs) must be up and must not have been migrated.
- D. All ISL ports must be moved to a different switch.
Answer: C
NEW QUESTION 41
Which statement regarding Epsilon is true?
- A. The node holding the epsilon has extra fractional vote weight.
- B. Epsilon is reassigned automatically to the HA partner in case the current owner of the epsilon suddenly reboots.
- C. Whenever a new node is added, the epsilon is automatically reassigned to this node.
- D. The epsilon acts as a tiebreaker in a 2-node cluster.
Answer: A
NEW QUESTION 42
You are preparing for the installation of a new 2-node cluster with ONTAP 9.7 using NL-SAS drives. Your customer wants to use the cluster exclusively with FlexGroups.
In this scenario, which two statements are correct? (Choose two.)
- A. All NL-SAS drives are divided evenly across both nodes.
- B. A NAS protocol is licensed on both nodes.
- C. A SAN protocol is licensed on both nodes.
- D. All NL-SAS drives are assigned only to one of the nodes.
Answer: A,B
NEW QUESTION 43
After you deploy a 4-node AFF A220, you want to upgrade the ONTAP version of the cluster.
In this scenario, before the upgrade, which advanced CLI command is used to locate epsilon?
- A. cluster ha show
- B. cluster show
- C. clustering ring show
- D. cluster image show
Answer: B
NEW QUESTION 44
Click the Exhibit button.
You plan to install a new ONTAP cluster at a customer site by using the new ONTAP System Manager 9.7 GUI.
Referring to the exhibit, what must you do before you provision initial storage?
- A. Configure a remote tier.
- B. Configure aggregates.
- C. Configure protocols.
- D. Configure cluster LIFs.
Answer: C
Explanation:
https://docs.netapp.com/us-en/ontap/task_configure_ontap.html
NEW QUESTION 45
Click the Exhibit button.
You want to add a FAS2750 HA pair to an existing 6-node cluster.
Referring to the exhibit, which action would you perform to begin adding the node?
- A. Use the exit or quit commands then run the cluster setup command.
- B. Use the node setup wizard and select 0a as the management interface.
- C. Reboot the node and enter maintenance mode and run the Cluster Setup wizard.
- D. Use the back command to begin the Cluster Setup wizard.
Answer: A
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sag%2FGUID-B13FF812-785E-4E62-9914-30E7A8F51A4C.html
NEW QUESTION 46
Which two NetApp features encrypt storage data? (Choose two.)
- A. NVMe
- B. NVE
- C. TPM
- D. NSE
Answer: B,D
NEW QUESTION 47
......
Latest 2022 Realistic Verified NS0-183 Dumps: https://www.prep4sureexam.com/NS0-183-dumps-torrent.html