Latest [Nov 09, 2021] HP HPE0-J68 Real Exam Dumps PDF
HPE0-J68 Practice Test Questions Updated 178 Questions
NEW QUESTION 61
A customer successfully implemented an HPE Primera solution.
Which tool can be used to verify achieved savings from deduplication and compression in the customer solution?
- A. NinjaSTARS
- B. NinjaCrawler
- C. StoreServ System Management Console
- D. 3PAR Service Processor
Answer: C
NEW QUESTION 62
What are two advantages of HPE Recovery Manager Central? (Select two.)
- A. Integration capabilities utilizing HTML
- B. Manual data provisioning and policy-based copy protection
- C. Includes Peer Copy asynchronous replication
- D. Enables automatic transparent failover
- E. Less expensive than traditional backup
Answer: C,E
NEW QUESTION 63
A customer has a new Nimble CS3000 21T storage systems and is facing latency issues for his 2TB ERP database. What would be a design approach to solve this issue ?
- A. Perform controller upgrade to a Nimbel CS3000 storage systems
- B. Add additional SSd drives as cache to the system and PIN the volume
- C. Change RAID of the drives to RAID -1and setup quality of services for the volume
- D. Enable storage tiering on the system and map the volume to the new tier
Answer: B
NEW QUESTION 64
Match the feature to the appropriate C-Series DCNM license type.
Answer:
Explanation:
NEW QUESTION 65
You have proposed that a customer replace their legacy SAN switches with new ?-Series switches. They are concerned about the management of all the devices, so you have included SANnav in the proposal.
What are the benefits of SANnav that you should emphasize to this customer? (Choose two.)
- A. It provides fine-grain visibility into Storage Fabrics (FC + Ethernet)
- B. It offers automated SPOCK validation
- C. It runs in a dedicated JVM
- D. It provides a global View
- E. It runs in a browser
Answer: D,E
NEW QUESTION 66
You deployed and configured an all-flash Nimble array. The customer wants to attach their Windows-based server to the array.
Which HPE tool can you use on the host server to make the integration easier?
- A. Channel bonding
- B. Centralized Management Console
- C. StorServe Management Console
- D. Connection Manager
Answer: D
NEW QUESTION 67
A customer needs to upgrade their HPE storage environment, including driver and firmware levels and OS, to the latest version.
Where can you find the needed information about supported versions?
- A. HPE OneView
- B. HPE SPOCK
- C. HPE SAN Design Reference Guide
- D. HPE Storage Assessment Foundry
Answer: B
NEW QUESTION 68
You have proposed a Primera array to a customer for new primary storage. The customer currently has an older 3PAR array that they will continue to use moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)
- A. 2-port 10 Gb Ethernet Adapter (NIC) is required
- B. 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
- C. RMC 6.2 is required
- D. No license is required
- E. Target drive type must match source drive type
Answer: B,C
NEW QUESTION 69
What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?
- A. Recovery Manager central
- B. HPE 3PAR Remote Copy
- C. Store virtual Peer motion
- D. StoreServ Peer Motion
Answer: A
NEW QUESTION 70
A customer has a large deployment of HPE Synergy compute modules, HPE 3PAR StoreServ storage, and HPE StoreOnce systems in a single data center. They are concerned about the risk of data loss due to site disaster.
What is the reason to propose HPE CloudBank?
- A. To easily move workloads to AWS or Azure in the event of site disaster.
- B. To leverage 3PAR snapshots and utilize StoreOnce recovery capabilities to minimize data loss and downtime.
- C. To improve RPO/RTO objectives by automating snapshot-based integrating between 3PAR and StoreOnce.
- D. To regularly send backups to the cloud for the purposes of DR protection.
Answer: D
NEW QUESTION 71
Which SAN topology offers the highest centralized data access performance?
- A. Ring
- B. Meshed
- C. Cascaded
- D. Core-Edge
Answer: D
NEW QUESTION 72
Which functionality available in an HPE 3 Par StoreServ 8400 system that is not available in an HPE 3par Storesrve 7200
- A. Persistent Checksum end-to-end data integrity (correct)
- B. Online import license
- C. Adaptive optimization and dynamic Optimization
- D. Data at Rest Encryption
Answer: A
NEW QUESTION 73
Which protocols are currently used in the front end by HPE 3PAR StoreServ systems? (Choose two.)
- A. SAS
- B. FC
- C. Infiniband
- D. iSCSI
- E. NVMe
Answer: B,D
NEW QUESTION 74
Match the MSA architecture components with their descriptions.
Answer:
Explanation:
NEW QUESTION 75
A customer run several HPE 3PAR storeserv system in their environment using data rest encryption .The customer needs to add an HPE 3PAR Storeserv 8000system to the storage pool and an external key manager for all systems.. What is the requirement for this solution?
- A. Data on the existing HPE 3PAR storeserv array must be decrypted and re-encrypted with new keys
- B. All drives of the new HPE 3PAR storeserv array must be self-encrypting
- C. Boot server for the existing 3PAR storeserv array must be replaced with self-encrypting drive
- D. HPE ESKM FIPS mode must be disabled by the administrator
Answer: B
NEW QUESTION 76
You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.
They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.
Which storage connectivity components should you recommend?
- A. Ethernet switches, Nimble FC card, dedicated FC for servers
- B. FC switches, Nimble FC card, FC adapters for servers
- C. FlexFabric switches, Nimble iSCSI card. FC adapters for servers
- D. Ethernet switches, Nimble iSCSI card, dedicated NICs for servers
Answer: D
NEW QUESTION 77
What is the benefits of HPE synergy(Select 2)
- A. It support up to 3 HPE store Virtual VSA nodes for storage RAID
- B. It can use HPE 3PAR file persona for objet storage
- C. It support HPE blade system C-Class Flex Fabrics Interconnect module (need to check)
- D. It can compose and reclaim DAS storage
- E. It can present block storage services from HPE 3par as part of the resource pool
Answer: D,E
NEW QUESTION 78
Match the type of storage found in today's market to the HPE storage solution optimized for that capacity?
- A. Scalability - Object
- B. MSA - Block
- C. Nimble - Block
- D. StoreVirtual - Block
- E. HPE 3PAR StoreServ - Block
- F. StoreEasy - File
Answer: E
NEW QUESTION 79
A customer is looking for a centralized file-sharing solution that can provide print services in addition to 15TB of storage.
Which solution component should you recommend?
- A. Disk enclosure with integrated SAS switch
- B. FC switch
- C. NAS
- D. FC-based array
Answer: C
NEW QUESTION 80
Which protocol can be used for accessing StoreOnce VTL target from Veeam?
- A. NFSv4
- B. FC
- C. SMBv3
- D. iSCSI
Answer: D
NEW QUESTION 81
A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports.
Which feature will address the customer's concern?
- A. Persistent Checksum
- B. Persistent Ports
- C. Persistent Cache
- D. Peer Persistence
Answer: A
NEW QUESTION 82
You are proposing a StoreOnce solution to a customer that has always used tape for a backup target.
What should you suggest to ensure that the StoreOnce deduplication is correctly sized?
- A. OCA
- B. proof of concept with StoreOnce VSA
- C. StoreOnce timeless storage
- D. DDAnalyzer
Answer: D
NEW QUESTION 83
A customer runs their core application on an aging HPE 3PAR StoreServ 20000 Storage array. The application requires 100% availability.
Which HPE storage solution should you recommend?
- A. MSA
- B. Nimble dHCI
- C. Primera
- D. Nimble
Answer: C
NEW QUESTION 84
Which HPE 3Par feature improves CPU utilization ,reduces latency and improve IOPS ?
- A. Zero Detect
- B. Persistent Cache
- C. Express Writes
- D. Express Indexing
Answer: C
NEW QUESTION 85
Due to industry regulation a customer is required to store backup at a separate data center from the company's main data center. The customer application require fast backup and quick restore increase of data lose. Which solution allow the customer to meet both industry and application requirement?
- A. Nimble AF series in main data center and Nimble SF series in secondary data center
- B. HPR StoreServ 3PAR in main data center and HPE StoreOnce in both main and secondary data center.
- C. HPE Storeserve 3Par in main data center HPE StoreOnce in secondary data center with RMC
- D. HPE storeServe 3par in main and secondary data center with RCIP replication between arrays
Answer: C
NEW QUESTION 86
......
HP HPE0-J68 Dumps - Secret To Pass in First Attempt: https://www.prep4sureexam.com/HPE0-J68-dumps-torrent.html
HPE0-J68 Dumps - Grab Out For [NEW-2021] HP Exam: https://drive.google.com/open?id=10FAvavYpGq-GXFQtBS4MhpjhS5sNlkCq