New Veeam VMCE2021 Dumps & Questions Updated on 2024
Dumps to Pass your VMCE2021 Exam with 100% Real Questions and Answers
NEW QUESTION # 41
Why is it recommended to install Veeam ONE before Veeam Backup & Replication?
- A. Veeam ONE can access the infrastructure for potential issues prior to performing backup
- B. Veeam ONE is a prerequisite for Veeam Backup & Replication installation
- C. It is recommended to add all of the servers involved in the backup process to Veeam ONE first, and then import the configuration to Veeam Backup & Replication
- D. Veeam ONE can verify the server you're going to install Veeam Backup and Replication on meets all system requirements
Answer: A
NEW QUESTION # 42
A backup job has been configured to keep three incremental restore points and a synthetic full backup each Sunday. More restore points are present on disk than what was configured in the job. Why?
- A. The old restore points will be deleted after the new restore chain meets the retention policy
- B. You should configure the synthetic full backup to be performed on Mondays instead
- C. Per VM backup files are enabled in the repository
- D. The other restore points are weekly full backups, this is expected
Answer: A
Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/synthetic_full_hiw.html?ver=100
NEW QUESTION # 43
A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?
- A. Configure a backup copy job in mirror mode, to a repository on the second site
- B. Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site
- C. Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site
- D. Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site
Answer: A
NEW QUESTION # 44
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?
- A. Aggregated data every two hours
- B. Data does not exist
- C. Aggregated data every five minutes
- D. Raw data every 20 seconds
Answer: C
Explanation:
Explanation
https://helpcenter.veeam.com/docs/one/deployment/data_collection_modes.html?ver=100
NEW QUESTION # 45
A company needs to recover a domain controller from a backup file they have on premises which was created by the Veeam Agent for Microsoft Windows. Which of the following would provide the fastest access to the domain controller?
- A. Perform a bare metal recovery of their domain controller back to the original system
- B. Recover the domain controller to an AWS EC2 instance using the restore to Amazon EC2
- C. Perform an Instant VM Recovery to recover the domain controller to a VM on their VMware host
- D. Use the Veeam Explorer for Active Directory to recover the domain controller
Answer: C
NEW QUESTION # 46
A Backup Administrator needs to create a fully functional VM at a secondary location in an isolated network, and the VM should not require manual editing or modifications to the configuration. Which of the following jobs could the Backup Administrator use? (Choose two.)
- A. SureBackup Job
- B. Configuration Backup Job
- C. Backup Job
- D. Replication Job
- E. VM Copy Job
Answer: D,E
Explanation:
https://helpcenter.veeam.com/archive/backup/100/vsphere/about_replication.html
NEW QUESTION # 47
What does Veeam's Secure Restore functionality ensure during restores?
- A. Proper rights/permissions on files and folders
- B. Custom ports for in-flight data
- C. Anti-virus scanning
- D. 256-bit AES encryption of in-flight data
Answer: C
NEW QUESTION # 48
Which file extension are associated with Veeam Backup & Replication? (Choose two)
- A. .vhb
- B. .bco
- C. .vlb
- D. .vbs
- E. .vrb
- F. .vbo
Answer: B,E
Explanation:
BCO - configuration backup file
VRB - reverse incremental backup file
https://powersjo.com/list-of-veeam-file-extensions/
NEW QUESTION # 49
The administrator of a VMware environment backed up by Veeam Backup & Replication has a critical server that has crashed and will not reboot. They were able to bring it back online quickly using Instant VM Recovery so people could continue to work. What else is required to complete the recovery?
- A. Commit fallback
- B. Migrate to production
- C. Commit failover
- D. Merge delta file
Answer: B
Explanation:
https://helpcenter.veeam.com/docs/backup/vsphere/instant_recovery_review_vm.html?ver=120
NEW QUESTION # 50
Under certain circumstances, VMware Changed Block Tracking (CBT) may be unavailable to Veeam Backup & Replication. What effect will a lack of CBT information have on the Veeam backup job?
- A. File Level Recovery would take a longer time for this restore point
- B. The backup job will fail
- C. Veeam Backup & Replication will perform a full backup automatically
- D. The backup job duration will increase
Answer: D
NEW QUESTION # 51
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?
- A. A standard virtual switch with uplink(s)
- B. A distributed virtual switch with uplink(s)
- C. A distributed virtual switch without uplink(s)
- D. A standard virtual switch without uplink(s)
Answer: A
Explanation:
https://helpcenter.veeam.com/docs/backup/vsphere/surebackup_advanced_vlab.html?ver=
NEW QUESTION # 52
Why is it recommended to install Veeam ONE before Veeam Backup & Replication?
- A. Veeam ONE verify that the server where Veeam Backup & Replication will be Installed meets all system requirements.
- B. It Is recommended to add all of the servers involved in the backup process to Veeam ONE first, and then import the configuration to Veeam Backup & Replication
- C. Veeam ONE is a prerequisite for Veeam Backup & Replication Installation.
- D. Veeam ONE can assess the Infrastructure for potential Issues prior to performing a backup.
Answer: D
NEW QUESTION # 53
A Backup Administrator needs to create a fully functional VM at a secondary location in an isolated network.
The VM should not require manual editing or modifications to the configuration. Which of the following jobs could the Backup Administrator use? Choose two options.
- A. VM Copy
- B. Replication
- C. VeeamZip
- D. Configuration Backup
- E. SureBackup
- F. Backup
Answer: A,B
Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/about_replication.html?ver=100
https://helpcenter.veeam.com/docs/backup/vsphere/vm_copy.html?ver=100
NEW QUESTION # 54
Which job type cannot be set to use job-level encryption? (Choose two).
- A. Backup job
- B. Backup copy job
- C. Configuration backup
- D. Replication job
- E. Backup to tape
Answer: C,D
Explanation:
https://helpcenter.veeam.com/docs/backup/vsphere/encrypted_jobs.html?ver=95
NEW QUESTION # 55
A physical Linux file server needs to be migrated to VMware ESXi. The server has several volumes: /dev/sda (60GB), /dev/sdb (1TB) and /dev/sdc (4TB). What is the quickest option to migrate the server?
- A. Export all disks, create an empty VM and attach the disks.
- B. Perform Instant VM Recovery.
- C. Create an empty VM and perform bare metal recovery inside the VM.
- D. Perform Instant Disk Recovery for each volume.
Answer: B
Explanation:
from https://helpcenter.veeam.com/docs/backup/agents/integration_instant_restore_vsphere.html?ver=120 "Restore to vSphere VM The procedure of Instant Recovery for a Veeam Agent computer practically does not differ from the same procedure for a VM. The main difference from Instant Recovery is that you do not need to select the recovery mode, because Veeam Agent computers are always restored to a new location."
NEW QUESTION # 56
A planned failover of three VMs has just completed successfully, starting the VMs at the disaster recovery location. What next actions are available for the failover plan?
- A. Cancel, Start, Copy, Delete
- B. Undo, Start, Copy, Delete
- C. Cancel, Start, Edit, Delete
- D. Undo, Start, Edit, Delete
Answer: D
Explanation:
https://helpcenter.veeam.com/archive/backup/110/vsphere/failover_plan_undo.html According to the Veeam Backup & Replication user guide1, a failover plan is a set of rules that defines how VMs must be failed over to their replicas1. You can create and run failover plans for regular replicas and CDP replicas1.
After you run a failover plan, you can perform the following actions on it2:
Undo -- reverts VMs in the failover plan back to their original state at the production site2.
Start -- runs the failover plan again if you need to repeat the failover operation for some reason2.
Edit -- modifies the settings of the failover plan, such as adding or removing VMs, changing their order or time delay1.
Delete -- removes the failover plan from Veeam Backup & Replication.
This does not affect the VM replicas that are used by the plan1.
NEW QUESTION # 57
Which of the following statements are true when comparing a synthetic full backup to an active full backup, on a NTFS-based Backup Repository? (Choose two.)
- A. The synthetic full backup file has a .vsb extension, whereas the active full backup has a .vbk extension
- B. Synthetic full backups consume more network bandwidth
- C. If the backup repository performance is weak, creating synthetic full backups is the best choice
- D. Synthetic full backups impose less load on the production environment
- E. In terms of content and retention, the synthetic full backup file is identical to an active full backup file
Answer: D,E
NEW QUESTION # 58
25 VMs are running on a VMware platform at a remote office (ROBO). The administrator has been tasked with setting up replication to the main office (HQ) so It can act as the disaster recovery site. The available bandwidth is 50 Mbps. RPO is set to four hours and the data generated for the interval is 150 GB. Which of the following will achieve the RPO?
- A. Use replication jobs with copy mode set to "interval copy". Schedule to run every four hours.
- B. Configure the replication Jobs with traffic throttling to 30 Mbps to limit the impact. Schedule to run every four hours.
- C. Configure the replication jobs with WAN acceleration enabled. Set the schedule to run every four hours.
- D. Use replication jobs with copy mode set to "periodic copy" and copy every four hours.
Answer: C
NEW QUESTION # 59
Which events in Veeam Backup & Replication can be configured for automatic email or general UI notifications? (Choose four.)
- A. Necessary updates for the VMware vSphere hosts and backup proxies
- B. A new Veeam Backup & Replication patch
- C. Necessary updates for the Microsoft Hyper-V hosts and off-host backup proxies
- D. Too many snapshots on the VM
- E. Veeam support contract expiration
- F. Low disk space at the repository
Answer: B,C,E,F
NEW QUESTION # 60
Which of the following backup file placement policies are available for Scale-Out Backup Repository? (Choose two.)
- A. Retention
- B. Grandfather-Father-Son (GFS)
- C. Performance
- D. Simple
- E. Data locality
Answer: C,E
Explanation:
https://helpcenter.veeam.com/docs/backup/hyperv/sobr_add_policy.html?ver=95
NEW QUESTION # 61
To suppress Veeam ONE alarms under specific conditions or when a specific event occurs, which of these options can be selected? (Choose three.)
- A. Veeam backup activity
- B. High CPU usage
- C. Storage snapshot deletion
- D. Snapshot deletion
- E. Storage snapshot creation
- F. Snapshot creation
Answer: A,D,F
Explanation:
https://helpcenter.veeam.com/docs/one/alarms/alarm_suppression.html?ver=100
NEW QUESTION # 62
The configuration database is corrupted, and the backup administrator wants to recover the dat a. Which configuration restore mode should be used?
- A. Restore
- B. Instant Recovery
- C. Migrate
- D. Failover
Answer: A
Explanation:
The Restore mode in the VMware Configuration Restore wizard restores the configuration database from a backup. This mode is typically used when the configuration database has become corrupted or damaged.
NEW QUESTION # 63
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?
- A. Re-add all Veeam components involved in data transfer through the required interfaces
- B. Create a global network traffic rule, set appropriate source and target IP range
- C. Update routing tables on the components involved in data transfer
- D. Use the preferred network settings to switch to data network for the backup traffic
Answer: D
Explanation:
Explanation
https://helpcenter.veeam.com/docs/backup/vsphere/select_backup_network.html?ver=100
NEW QUESTION # 64
Which of the following Veeam Backup & Replication jobs can be set up to support GFS retention?
(Choose two.)
- A. Configuration Backup
- B. Replication
- C. Backup Copy
- D. Backup
- E. Backup to tape
Answer: C,D
NEW QUESTION # 65
......
Updated Exam VMCE2021 Dumps with New Questions: https://www.prep4sureexam.com/VMCE2021-dumps-torrent.html
Today Updated VMCE2021 Exam Dumps Actual Questions: https://drive.google.com/open?id=1jghzy2ljGGzqcBGQk5CxKwZDIB6gMovo