[Oct 24, 2023] Get New NSE7_PBC-6.4 Certification – Valid Exam Dumps Questions
100% Passing Guarantee - Brilliant NSE7_PBC-6.4 Exam Questions PDF
Fortinet NSE7_PBC-6.4 exam is a vendor-neutral certification that is recognized globally. It is an essential certification for IT professionals who want to advance their careers in cloud security. Fortinet NSE 7 - Public Cloud Security 6.4 certification validates the skills and knowledge of professionals in designing, implementing, and managing security solutions for public cloud infrastructures. The Fortinet NSE7_PBC-6.4 certification also demonstrates a professional’s commitment to their field and to staying up-to-date with the latest technologies and best practices.
NEW QUESTION # 18
You are deploying Amazon Web Services (AWS) GuardDuty to monitor malicious or unauthorized behaviors related to AWS resources. You will also use the Fortinet aws-lambda-guardduty script to translate feeds from AWS GuardDuty findings into a list of malicious IP addresses. FortiGate can then consume this list as an external threat feed.
Which Amazon AWS services must you subscribe to in order to use this feature?
- A. GuardDuty, CloudWatch, S3, and DynamoDB.
- B. Inspector, Shield, GuardDuty, S3, and DynamoDB.
- C. GuardDuty, CloudWatch, S3, Inspector, WAF, and Shield.
- D. WAF, Shield, GuardDuty, S3, and DynamoDB.
Answer: C
NEW QUESTION # 19
Refer to the exhibit.
Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)
- A. The network interface of the active unit moves to itself
- B. 172.29.32.71 is set as a next hop IP for all routes under FortigateUDR-01
- C. SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01
- D. SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT- 0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01
Answer: B,D
NEW QUESTION # 20
When configuring the FortiCASB policy, which three configuration options are available? (Choose three.)
- A. Intrusion prevention policies
- B. Data loss prevention policies
- C. Compliance policies
- D. Antivirus policies
- E. Threat protection policies
Answer: B,C,E
NEW QUESTION # 21
Which three properties are configurable Microsoft Azure network security group rule settings? (Choose three.)
- A. Sequence number
- B. Source and destination IP ranges
- C. Source port ranges
- D. Action
- E. Destination port ranges
Answer: C,D,E
NEW QUESTION # 22
Refer to the exhibit.
A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Web servers to the Internet. The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface.
What are two possible reasons for this behavior? (Choose two.)
- A. The web servers are not configured with the default gateway.
- B. The Internet gateway (IGW) is not added to VPC (virtual private cloud).
- C. AWS security groups may be blocking the traffic.
- D. AWS source and destination checks are enabled on the FortiGate interfaces.
Answer: C,D
Explanation:
Explanation
You need to check if source/destination are enabled. Public_Cloud_6.4_Study_Guide Page 67
NEW QUESTION # 23
An Amazon Web Services (AWS) auto-scale FortiGate cluster has just experienced a scale-down event, terminating a FortiGate in availability zone C.
This has now black-holed the private subnet in this availability zone.
What action will the worker node automatically perform to restore access to the black-holed subnet?
- A. The worker node migrates the subnet to a different availability zone.
- B. The worker node moves the virtual IP of the terminated FortiGate to a running FortiGate on the worker node's private subnet interface.
- C. The worker node applies a route table from a non-black-holed subnet to the black-holed subnet.
- D. The worker node modifies the route table applied to the black-holed subnet changing its default route to point to a running FortiGate on the worker node's private subnet interface.
Answer: A
NEW QUESTION # 24
You are deploying Amazon Web Services (AWS) GuardDuty to monitor malicious or unauthorized behaviors related to AWS resources. You will also use the Fortinet aws-lambda-guarddutyscript to translate feeds from AWS GuardDuty findings into a list of malicious IP addresses. FortiGate can then consume this list as an external threat feed.
Which Amazon AWS services must you subscribe to in order to use this feature?
- A. GuardDuty, CloudWatch, S3, and DynamoDB.
- B. Inspector, Shield, GuardDuty, S3, and DynamoDB.
- C. GuardDuty, CloudWatch, S3, Inspector, WAF, and Shield.
- D. WAF, Shield, GuardDuty, S3, and DynamoDB.
Answer: C
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/ed901ad2-4424-11e9-
94bf-00505692583a/FortiOS_6.2.0_AWS_Cookbook.pdf
NEW QUESTION # 25
Refer to the exhibit.
Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)
- A. Configure VNet peering between the spokes only.
- B. Configure VNet peering between the hub and spokes.
- C. Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.
- D. Use ExpressRoute to interconnect the hub VNets and spoke VNets.
Answer: B,D
NEW QUESTION # 26
You have been asked to develop an Azure Resource Manager infrastructure as a code template for the FortiGate-VM, that can be reused for multiple deployments. The deployment fails, and errors point to the storageAccount name.
Which two are restrictions for a storageAccount name in an Azure Resource Manager template? (Choose two.)
- A. The uniqueString() function must be used.
- B. The storageAccount name must be in lowercase.
- C. The storageAccount name must contain between 3 and 24 alphanumeric characters.
- D. The storageAccount name must use special characters.
Answer: B,C
Explanation:
Explanation
-Storage account names must be between 3 and 24 characters in length and may contain numbers and lowercase letters only. https://learn.microsoft.com/en-us/azure/storage/common/storage-account-overview
https://docs.microsoft.com/en-us/azure/templates/microsoft.storage/storageaccounts?tabs=bicep Property values / storageAccounts name --> The resource name :
* string (required)
* Character limit: 3-24
* Valid characters: Lowercase letters and numbers.
* Resource name must be unique across Azure.
NEW QUESTION # 27
Which two statements about Amazon Web Services (AWS) networking are correct? (Choose two.)
- A. 802.1q VLAN tags are allowed inside the same virtual private cloud.
- B. AWS DNS reserves the first host IP address of each subnet.
- C. Proxy ARP entries are disregarded.
- D. Multicast traffic is not allowed.
Answer: B,D
NEW QUESTION # 28
Refer to the exhibit.
You are configuring an active-passive FortiGate clustering protocol (FGCP) HA configuration in a single availability zone in Amazon Web Services (AWS), using a cloud formation template.
After deploying the template, you notice that the AWS console has IP information listed in the FortiGate VM firewalls in the HA configuration. However, within the configuration of FortiOS, you notice that port1 is using an IP of 10.0.0.13, and port2 is using an IP of 10.0.1.13.
What should you do to correct this issue?
- A. Configure FortiOS to use static IP addresses with the IP addresses reflected in the ENI primary IP address configuration (as per the exhibit).
- B. Delete the deployment and start again. You have in put the wrong parameters during the cloud formation template deployment.
- C. Configure FortiOS to use DHCP so that it will get the correct IP addresses on the ports.
- D. Nothing, in AWS cloud, it is normal for a FortiGate ENI primary IP address to be different than the FortiOS IP address configuration.
Answer: D
NEW QUESTION # 29
You have previously deployed an Amazon Web Services (AWS) transit virtual private cloud (VPC) with a pair of FortiGate firewalls (VM04 / c4.xlarge) as your security perimeter. You are beginning to see high CPU usage on the FortiGate instances.
Which action will fix this issue?
- A. Convert the transit VPC firewalls into an auto-scaling group and launch additional EC2 instances in that group.
- B. Convert the c4.xlarge instances to m4.xlarge instances.
- C. Convert from IPsec tunnels to generic routing encapsulation (GRE) tunnels, for the VPC peering connections.
- D. Migrate the transit VPNs to new and larger instances (VM08 / c4.2xlarge).
Answer: A
NEW QUESTION # 30
You have been asked to develop an Azure Resource Manager infrastructure as a code template for the FortiGate-VM, that can be reused for multiple deployments. The deployment fails, and errors point to the storageAccount name.
Which two are restrictions for a storageAccount name in an Azure Resource Manager template? (Choose two.)
- A. The storageAccount name must be in lowercase.
- B. The uniqueString() function must be used.
- C. The storageAccount name must use special characters.
- D. The storageAccount name must contain between 3 and 24 alphanumeric characters.
Answer: A,B
NEW QUESTION # 31
Refer to the exhibit.
The exhibit shows a topology where multiple connections from clients to the same FortiGate-VM instance, regardless of the protocol being used, are required.
Which two statements are correct? (Choose two.)
- A. The design shows an active-active FortiGate-VM architecture.
- B. The design shows an active-passive FortiGate-VM architecture.
- C. The Cloud Load Balancer Session Affinity setting should be changed to CLIENT_IP.
- D. The Cloud Load Balancer Session Affinity setting should use the default value.
Answer: A,C
Explanation:
Explanation
https://github.com/fortinet/fortigate-autoscale-gcp/blob/main/network.tf session_affinity = "CLIENT_IP" A - we using A-A architecture with GCP NLB B to ensure that the same client always reach the same machine regardless the protocol we must configure a session affinity that route the same source IP to the same instance as we can see in the TF deployment file
https://github.com/fortinet/fortigate-autoscale-gcp/blob/main/network.tf
"### Target Pools ###
resource "google_compute_target_pool" "default" {
name = "${var.cluster_name}-instancepool-${random_string.random_name_post.result}" session_affinity = "CLIENT_IP" health_checks = [
"${google_compute_http_health_check.default.name}",
]
}
"
NEW QUESTION # 32
Refer to the exhibit.
Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)
- A. Configure VNet peering between the spokes only.
- B. Use ExpressRoute to interconnect the hub VNets and spoke VNets.
- C. Configure VNet peering between the hub and spokes.
- D. Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.
Answer: C,D
NEW QUESTION # 33
Refer to the exhibit.
A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Web servers to the Internet. The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface.
What are two possible reasons for this behavior? (Choose two.)
- A. AWS source and destination checks are enabled on the FortiGate interfaces.
- B. The web servers are not configured with the default gateway.
- C. The Internet gateway (IGW) is not added to VPC (virtual private cloud).
- D. AWS security groups may be blocking the traffic.
Answer: B,D
NEW QUESTION # 34
Refer to the exhibit.
You are configuring an active-passive FortiGate clustering protocol (FGCP) HA configuration in a single availability zone in Amazon Web Services (AWS), using a cloud formation template.
After deploying the template, you notice that the AWS console has IP information listed in the FortiGate VM firewalls in the HA configuration. However, within the configuration of FortiOS, you notice that port1 is using an IP of 10.0.0.13, and port2 is using an IP of 10.0.1.13.
What should you do to correct this issue?
- A. Configure FortiOS to use static IP addresses with the IP addresses reflected in the ENI primary IP address configuration (as per the exhibit).
- B. Delete the deployment and start again. You have in put the wrong parameters during the cloud formation template deployment.
- C. Nothing, in AWS cloud, it is normal for a FortiGate ENI primary IP address to be different than the FortiOS IP address configuration.
- D. Configure FortiOS to use DHCP so that it will get the correct IP addresses on the ports.
Answer: D
NEW QUESTION # 35
What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?
- A. Up to 1.25 Gbps per attachment
- B. Up to 1 Gbps per attachment
- C. Up to 50 Gbps per attachment
- D. Up to 10 Gbps per attachment
Answer: A
Explanation:
Explanation/Reference: https://d1.awsstatic.com/whitepapers/building-a-scalable-and-secure-multi-vpc-aws-network- infrastructure.pdf (5)
NEW QUESTION # 36
......
Free NSE7_PBC-6.4 braindumps download: https://www.prep4sureexam.com/NSE7_PBC-6.4-dumps-torrent.html
NSE7_PBC-6.4 Dumps 2023 - NewFortinet Exam Questions: https://drive.google.com/open?id=1oGWeZZl962hfGoZmWBfs64S0tvS2ck2c