Valid 350-501 Exam Q&A PDF 350-501 Dump is Ready (Updated 250 Questions)
Exam Questions and Answers for 350-501 Study Guide
Introduction to Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
This exam is for a networking career through how networks operate. This exam introduces architectures, models, protocols, and networking elements â functions needed to support the operations and priorities of mid-sized to large companies and small innovative retailers. You will get the chance to build simple local area networks (LANs) yourself. You will also get a working knowledge of IP addressing schemes, foundational network security, and be able to perform basic configurations for routers and switches.
The primary responsibility of the Associate Network Engineer is to update the technical standards and strategic technical roadmaps. The professionals must take care of the network engineering policies, and operations that include network programmability. The Network Engineer has to act as a backup for the LAN/WAN and Firewall teams whenever required. They must install, monitor, and maintain the LAN infrastructure. The professional should make sure smooth and proper functioning of the network system.
The Troubleshooting and Managing Cisco IP Networks Cisco Training on Demand is an all-inclusive training solution intended to show you how to plan and maintain on a routine basis complex business networks routed and switched. You will first understand how to use technology-based methods and a comprehensive approach to network troubleshooting. You can learn to use both common Cisco IOS troubleshooting tools and more advanced tools such as Syslog, NetFlow, and Cisco IOS Embedded Event Manager (EEM) to help with troubleshooting efforts. In the hands-on workshops, you discover the methods and methods used by network engineers for troubleshooting and managing complex network routed and switching networks. You can also learn how to troubleshoot network connectivity issues, IPv6 connectivity and assignment issues, routing loop issues, Improved Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF) Protocol, and Boundary Gateway Protocol (BGP) routing problems. Besides, you are operating via the Dynamic Host Configuration Protocol (DHCP) to resolve problems, network security, and VLAN configuration issues, as well as many other general network issues. A crucial requirement of this course is the opportunity to learn new ideas and deepen comprehension across a wide variety of integrated lab scenarios. You have troubleshooting possibilities through 350-501 practice dumps and several lab environments across a variety of case studies.
NEW QUESTION 83
Refer to the exhibit.
Router 1 is missing the route for the router 2 loopback 0. What should the engineer change to fix the problem?
- A. the area numbers on Router 1 and Router 2 to be similar
- B. the wildcard mask network statement in OSPF of Router 2
- C. Router 1 to be an ABR
- D. the hello timers on Router 1 and Router 2 to be different
Answer: A
NEW QUESTION 84
A company needs to improve the use of the network resources that is used to deploy internet access service to customers on separate backbone and internet access network. Which two major design models should be used to configure MPLS L3VPNs and internet service in the same MPLS backbone? (Choose two.)
- A. Internet access for global routing via a separate interface in a VRF
- B. Carriage of full internet routes in a VPN, in the case of internet access VPNS
- C. Internet routing through global routing on a PE router.
- D. Internet access through leaking of internet routed from the global table into the L3VPN VRF
- E. Internet access routing as another VPN in the ISP network.
Answer: A,E
Explanation:
http://etutorials.org/Networking/MPLS+VPN+security/Part+II+Advanced+MPLS+VPN+Security+Issues/Chapter+4.+Secure+MPLS+VPN+Designs/Internet+Access/
NEW QUESTION 85
In an MPLS network, which protocol can be used to distribute a Segment Prefix?
- A. RSVP-TE
- B. EIGRP
- C. LDP
- D. OSPF
Answer: D
NEW QUESTION 86
Refer to the exhibit:
Which statement supports QPPB implementation?
- A. QPPB policies affect only egress traffic
- B. QoS policies are identified in the MPLS forwarding table
- C. QoS policies rely exclusively on BGP attributes to manipulate traffic
- D. QoS policies use BGP to gain full coverage on the network.
Answer: C
NEW QUESTION 87
Drag and drop the functions from the left onto the Path Computation Element Protocol roles on the right.
Answer:
Explanation:
Explanation
PCE - 1,2,5
PCC- 3,4
NEW QUESTION 88
Which two routing protocols support Cisco MPLS TE Tunnels? (Choose two.)
- A. IS-IS
- B. EIGRP
- C. BGP
- D. OSPF
- E. RIP
Answer: A,D
NEW QUESTION 89
Drag and drop the functionalities from the left onto the correct target fields on the right.
Answer:
Explanation:
NEW QUESTION 90
Which configuration modifies Local Packet Transport Services hardware policies?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: A
NEW QUESTION 91
An engineer working for telecommunication company with an employee id: 3715 15 021 needs to secure the LAN network using a prefix list Which best practice should the engineer follow when he implements a prefix list?
- A. An engineer must include only the prefixes for which he needs to log activity.
- B. An engineer must use non sequential sequence numbers in the prefix list so that he can insert additional entries later.
- C. The final entry in a prefix list must be /32
- D. An engineer must identity the prefix list with a number only
Answer: B
NEW QUESTION 92
What are two factors to consider when implementing NSR High Availability on an MPLS PE router? (Choose two.)
- A. It consumes more memory and CPU resources than NSF
- B. It requires all PE-CE sessions to support NSR
- C. It requires routing protocol extensions
- D. It operates normally without NSR support on the PE peers.
- E. It cannot sync state information across redundant RPs
Answer: A,D
NEW QUESTION 93
Refer to the exhibit:
Which effect of this configuration is true?
- A. It enables tagging for VLAN 12 on the interface
- B. it creates a pseudowire class named Cisco
- C. It enables AToM on interface gigabitethemet1/0
- D. It enables MPLS on the interface
Answer: B
NEW QUESTION 94
Which BGP attribute i5 used first when determining the best path?
- A. weight
- B. origin
- C. local preference
- D. AS path
Answer: A
NEW QUESTION 95
Which two tasks must you perform when you implement LDP NSF on your network? (Choose two.)
- A. Implement direct connections for LDP peers
- B. Enable NSF for BGP
- C. Disable Cisco Express Forwarding
- D. Enable NSF for EIGRP
- E. Enable NSF for the link-state routing protocol that is in use on the network.
Answer: A,E
NEW QUESTION 96
Drag and drop the functionalities from the left onto the correct target fields on the right.
Answer:
Explanation:
NEW QUESTION 97
An engineer is implementing MPLS to monitor within the MPLS domain. Which must the engineer perform to prevent packets from being forwarded beyond the service provider domain when the LSP is down?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
NEW QUESTION 98
Refer to the exhibit.
Which configuration must be applied to each of the four routers on the network to reduce LDP LIB size and advertise label bindings for the /32 loopback IP space only?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: A
NEW QUESTION 99
Refer to the exhibit:
If router RA is configured as shown, which IPv4 multicast address space does it use?
- A. 225.0. 0.0/8
- B. 239.0. 0.0/8
- C. 232.0. 0.0/8
- D. 224.0. 0.0/8
Answer: C
NEW QUESTION 100
What does DWDM use to combine multiple optical signals?
- A. IP protocols
- B. frequency
- C. time slots
- D. wavelength
Answer: D
NEW QUESTION 101
Refer to the exhibit:
It the NetFlow configuration is updated to version 9, which additional piece of information can be reported"?
- A. BGP AS information
- B. flow sequence numbers
- C. IPv4 flow information
- D. IPv6 flow information
Answer: D
NEW QUESTION 102
......
What is the duration, language, and format of Cisco 350-501: Implementing and Operating Cisco Service Provider Network Core Technologies Exam
- Duration of Exam: 120 minutes
- Validity: 3 years
- Format: Multiple choice
- Language of Exam: English
Certification dumps - CCNP Service Provider 350-501 guides - 100% valid: https://www.prep4sureexam.com/350-501-dumps-torrent.html
100% Pass Your 350-501 Implementing and Operating Cisco Service Provider Network Core Technologies at First Attempt with Prep4sureExam: https://drive.google.com/open?id=17JFvBJdt54pRQLFwqHPZ_Ji3r_24lg5o